EVOLUTION-NINJA

Edit File: restore.php

<?php
/**
 * Akeeba Restore
 *
 * An archive extraction engine for ZIP, JPA and JPS archives.
 *
 * @copyright   2008-2017 Nicholas K. Dionysopoulos / Akeeba Ltd.
 * @license     GNU GPL v2 or - at your option - any later version
 * @note        This file has been modified by the Joomla! Project and no longer reflects the original work of its author.
 */

define('_AKEEBA_RESTORATION', 1);
defined('DS') or define('DS', DIRECTORY_SEPARATOR);

// Unarchiver run states
define('AK_STATE_NOFILE', 0); // File header not read yet
define('AK_STATE_HEADER', 1); // File header read; ready to process data
define('AK_STATE_DATA', 2); // Processing file data
define('AK_STATE_DATAREAD', 3); // Finished processing file data; ready to post-process
define('AK_STATE_POSTPROC', 4); // Post-processing
define('AK_STATE_DONE', 5); // Done with post-processing

/* Windows system detection */
if (!defined('_AKEEBA_IS_WINDOWS'))
{
	if (function_exists('php_uname'))
	{
		define('_AKEEBA_IS_WINDOWS', stristr(php_uname(), 'windows'));
	}
	else
	{
		define('_AKEEBA_IS_WINDOWS', DIRECTORY_SEPARATOR == '\\');
	}
}

// Get the file's root
if (!defined('KSROOTDIR'))
{
	define('KSROOTDIR', dirname(__FILE__));
}
if (!defined('KSLANGDIR'))
{
	define('KSLANGDIR', KSROOTDIR);
}

// Make sure the locale is correct for basename() to work
if (function_exists('setlocale'))
{
	@setlocale(LC_ALL, 'en_US.UTF8');
}

// fnmatch not available on non-POSIX systems
// Thanks to soywiz@php.net for this useful alternative function [http://gr2.php.net/fnmatch]
if (!function_exists('fnmatch'))
{
	function fnmatch($pattern, $string)
	{
		return @preg_match(
			'/^' . strtr(addcslashes($pattern, '/\\.+^$(){}=!<>|'),
				array('*' => '.*', '?' => '.?')) . '$/i', $string
		);
	}
}

// Unicode-safe binary data length function
if (!function_exists('akstringlen'))
{
	if (function_exists('mb_strlen'))
	{
		function akstringlen($string)
		{
			return mb_strlen($string, '8bit');
		}
	}
	else
	{
		function akstringlen($string)
		{
			return strlen($string);
		}
	}
}

if (!function_exists('aksubstr'))
{
	if (function_exists('mb_strlen'))
	{
		function aksubstr($string, $start, $length = null)
		{
			return mb_substr($string, $start, $length, '8bit');
		}
	}
	else
	{
		function aksubstr($string, $start, $length = null)
		{
			return substr($string, $start, $length);
		}
	}
}

/**
 * Gets a query parameter from GET or POST data
 *
 * @param $key
 * @param $default
 */
function getQueryParam($key, $default = null)
{
	$value = $default;

if (array_key_exists($key, $_REQUEST))
	{
		$value = $_REQUEST[$key];

if (PHP_VERSION_ID < 50400 && get_magic_quotes_gpc() && !is_null($value))
		{
			$value = stripslashes($value);
		}
	}

return $value;
}

// Debugging function
function debugMsg($msg)
{
	if (!defined('KSDEBUG'))
	{
		return;
	}

$fp = fopen('debug.txt', 'at');

fwrite($fp, $msg . "\n");
	fclose($fp);

// Echo to stdout if KSDEBUGCLI is defined
	if (defined('KSDEBUGCLI'))
	{
		echo $msg . "\n";
	}
}

/**
 * The base class of Akeeba Engine objects. Allows for error and warnings logging
 * and propagation. Largely based on the Joomla! 1.5 JObject class.
 */
abstract class AKAbstractObject
{
	/** @var    array    The queue size of the $_errors array. Set to 0 for infinite size. */
	protected $_errors_queue_size = 0;
	/** @var    array    The queue size of the $_warnings array. Set to 0 for infinite size. */
	protected $_warnings_queue_size = 0;
	/** @var    array    An array of errors */
	private $_errors = array();
	/** @var    array    An array of warnings */
	private $_warnings = array();

/**
	 * Get the most recent error message
	 *
	 * @param    integer $i Optional error index
	 *
	 * @return    string    Error message
	 */
	public function getError($i = null)
	{
		return $this->getItemFromArray($this->_errors, $i);
	}

/**
	 * Returns the last item of a LIFO string message queue, or a specific item
	 * if so specified.
	 *
	 * @param array $array An array of strings, holding messages
	 * @param int   $i     Optional message index
	 *
	 * @return mixed The message string, or false if the key doesn't exist
	 */
	private function getItemFromArray($array, $i = null)
	{
		// Find the item
		if ($i === null)
		{
			// Default, return the last item
			$item = end($array);
		}
		else if (!array_key_exists($i, $array))
		{
			// If $i has been specified but does not exist, return false
			return false;
		}
		else
		{
			$item = $array[$i];
		}

return $item;
	}

/**
	 * Return all errors, if any
	 *
	 * @return    array    Array of error messages
	 */
	public function getErrors()
	{
		return $this->_errors;
	}

/**
	 * Resets all error messages
	 */
	public function resetErrors()
	{
		$this->_errors = array();
	}

/**
	 * Get the most recent warning message
	 *
	 * @param    integer $i Optional warning index
	 *
	 * @return    string    Error message
	 */
	public function getWarning($i = null)
	{
		return $this->getItemFromArray($this->_warnings, $i);
	}

/**
	 * Return all warnings, if any
	 *
	 * @return    array    Array of error messages
	 */
	public function getWarnings()
	{
		return $this->_warnings;
	}

/**
	 * Resets all warning messages
	 */
	public function resetWarnings()
	{
		$this->_warnings = array();
	}

/**
	 * Propagates errors and warnings to a foreign object. The foreign object SHOULD
	 * implement the setError() and/or setWarning() methods but DOESN'T HAVE TO be of
	 * AKAbstractObject type. For example, this can even be used to propagate to a
	 * JObject instance in Joomla!. Propagated items will be removed from ourselves.
	 *
	 * @param object $object The object to propagate errors and warnings to.
	 */
	public function propagateToObject(&$object)
	{
		// Skip non-objects
		if (!is_object($object))
		{
			return;
		}

if (method_exists($object, 'setError'))
		{
			if (!empty($this->_errors))
			{
				foreach ($this->_errors as $error)
				{
					$object->setError($error);
				}
				$this->_errors = array();
			}
		}

if (method_exists($object, 'setWarning'))
		{
			if (!empty($this->_warnings))
			{
				foreach ($this->_warnings as $warning)
				{
					$object->setWarning($warning);
				}
				$this->_warnings = array();
			}
		}
	}

/**
	 * Propagates errors and warnings from a foreign object. Each propagated list is
	 * then cleared on the foreign object, as long as it implements resetErrors() and/or
	 * resetWarnings() methods.
	 *
	 * @param object $object The object to propagate errors and warnings from
	 */
	public function propagateFromObject(&$object)
	{
		if (method_exists($object, 'getErrors'))
		{
			$errors = $object->getErrors();
			if (!empty($errors))
			{
				foreach ($errors as $error)
				{
					$this->setError($error);
				}
			}
			if (method_exists($object, 'resetErrors'))
			{
				$object->resetErrors();
			}
		}

if (method_exists($object, 'getWarnings'))
		{
			$warnings = $object->getWarnings();
			if (!empty($warnings))
			{
				foreach ($warnings as $warning)
				{
					$this->setWarning($warning);
				}
			}
			if (method_exists($object, 'resetWarnings'))
			{
				$object->resetWarnings();
			}
		}
	}

/**
	 * Add an error message
	 *
	 * @param    string $error Error message
	 */
	public function setError($error)
	{
		if ($this->_errors_queue_size > 0)
		{
			if (count($this->_errors) >= $this->_errors_queue_size)
			{
				array_shift($this->_errors);
			}
		}

$this->_errors[] = $error;
	}

/**
	 * Add an error message
	 *
	 * @param    string $error Error message
	 */
	public function setWarning($warning)
	{
		if ($this->_warnings_queue_size > 0)
		{
			if (count($this->_warnings) >= $this->_warnings_queue_size)
			{
				array_shift($this->_warnings);
			}
		}

$this->_warnings[] = $warning;
	}

/**
	 * Sets the size of the error queue (acts like a LIFO buffer)
	 *
	 * @param int $newSize The new queue size. Set to 0 for infinite length.
	 */
	protected function setErrorsQueueSize($newSize = 0)
	{
		$this->_errors_queue_size = (int) $newSize;
	}

/**
	 * Sets the size of the warnings queue (acts like a LIFO buffer)
	 *
	 * @param int $newSize The new queue size. Set to 0 for infinite length.
	 */
	protected function setWarningsQueueSize($newSize = 0)
	{
		$this->_warnings_queue_size = (int) $newSize;
	}

}

/**
 * The superclass of all Akeeba Kickstart parts. The "parts" are intelligent stateful
 * classes which perform a single procedure and have preparation, running and
 * finalization phases. The transition between phases is handled automatically by
 * this superclass' tick() final public method, which should be the ONLY public API
 * exposed to the rest of the Akeeba Engine.
 */
abstract class AKAbstractPart extends AKAbstractObject
{
	/**
	 * Indicates whether this part has finished its initialisation cycle
	 *
	 * @var boolean
	 */
	protected $isPrepared = false;

/**
	 * Indicates whether this part has more work to do (it's in running state)
	 *
	 * @var boolean
	 */
	protected $isRunning = false;

/**
	 * Indicates whether this part has finished its finalization cycle
	 *
	 * @var boolean
	 */
	protected $isFinished = false;

/**
	 * Indicates whether this part has finished its run cycle
	 *
	 * @var boolean
	 */
	protected $hasRan = false;

/**
	 * The name of the engine part (a.k.a. Domain), used in return table
	 * generation.
	 *
	 * @var string
	 */
	protected $active_domain = "";

/**
	 * The step this engine part is in. Used verbatim in return table and
	 * should be set by the code in the _run() method.
	 *
	 * @var string
	 */
	protected $active_step = "";

/**
	 * A more detailed description of the step this engine part is in. Used
	 * verbatim in return table and should be set by the code in the _run()
	 * method.
	 *
	 * @var string
	 */
	protected $active_substep = "";

/**
	 * Any configuration variables, in the form of an array.
	 *
	 * @var array
	 */
	protected $_parametersArray = array();

/** @var string The database root key */
	protected $databaseRoot = array();
	/** @var array An array of observers */
	protected $observers = array();
	/** @var int Last reported warnings's position in array */
	private $warnings_pointer = -1;

/**
	 * The public interface to an engine part. This method takes care for
	 * calling the correct method in order to perform the initialisation -
	 * run - finalisation cycle of operation and return a proper response array.
	 *
	 * @return    array    A Response Array
	 */
	final public function tick()
	{
		// Call the right action method, depending on engine part state
		switch ($this->getState())
		{
			case "init":
				$this->_prepare();
				break;
			case "prepared":
			case "running":
				$this->_run();
				break;
			case "postrun":
				$this->_finalize();
				break;
		}

// Send a Return Table back to the caller
		$out = $this->_makeReturnTable();

return $out;
	}

/**
	 * Returns the state of this engine part.
	 *
	 * @return string The state of this engine part. It can be one of
	 * error, init, prepared, running, postrun, finished.
	 */
	final public function getState()
	{
		if ($this->getError())
		{
			return "error";
		}

if (!($this->isPrepared))
		{
			return "init";
		}

if (!($this->isFinished) && !($this->isRunning) && !($this->hasRun) && ($this->isPrepared))
		{
			return "prepared";
		}

if (!($this->isFinished) && $this->isRunning && !($this->hasRun))
		{
			return "running";
		}

if (!($this->isFinished) && !($this->isRunning) && $this->hasRun)
		{
			return "postrun";
		}

if ($this->isFinished)
		{
			return "finished";
		}

// Unknown internal state. This should never happen.
		return "error";
	}

/**
	 * Runs the preparation for this part. Should set _isPrepared
	 * to true
	 */
	abstract protected function _prepare();

/**
	 * Runs the main functionality loop for this part. Upon calling,
	 * should set the _isRunning to true. When it finished, should set
	 * the _hasRan to true. If an error is encountered, setError should
	 * be used.
	 */
	abstract protected function _run();

/**
	 * Runs the finalisation process for this part. Should set
	 * _isFinished to true.
	 */
	abstract protected function _finalize();

/**
	 * Constructs a Response Array based on the engine part's state.
	 *
	 * @return array The Response Array for the current state
	 */
	final protected function _makeReturnTable()
	{
		// Get a list of warnings
		$warnings = $this->getWarnings();
		// Report only new warnings if there is no warnings queue size
		if ($this->_warnings_queue_size == 0)
		{
			if (($this->warnings_pointer > 0) && ($this->warnings_pointer < (count($warnings))))
			{
				$warnings = array_slice($warnings, $this->warnings_pointer + 1);
				$this->warnings_pointer += count($warnings);
			}
			else
			{
				$this->warnings_pointer = count($warnings);
			}
		}

$out = array(
			'HasRun'   => (!($this->isFinished)),
			'Domain'   => $this->active_domain,
			'Step'     => $this->active_step,
			'Substep'  => $this->active_substep,
			'Error'    => $this->getError(),
			'Warnings' => $warnings
		);

return $out;
	}

/**
	 * Returns a copy of the class's status array
	 *
	 * @return array
	 */
	public function getStatusArray()
	{
		return $this->_makeReturnTable();
	}

/**
	 * Sends any kind of setup information to the engine part. Using this,
	 * we avoid passing parameters to the constructor of the class. These
	 * parameters should be passed as an indexed array and should be taken
	 * into account during the preparation process only. This function will
	 * set the error flag if it's called after the engine part is prepared.
	 *
	 * @param array $parametersArray The parameters to be passed to the
	 *                               engine part.
	 */
	final public function setup($parametersArray)
	{
		if ($this->isPrepared)
		{
			$this->setState('error', "Can't modify configuration after the preparation of " . $this->active_domain);
		}
		else
		{
			$this->_parametersArray = $parametersArray;
			if (array_key_exists('root', $parametersArray))
			{
				$this->databaseRoot = $parametersArray['root'];
			}
		}
	}

/**
	 * Sets the engine part's internal state, in an easy to use manner
	 *
	 * @param    string $state        One of init, prepared, running, postrun, finished, error
	 * @param    string $errorMessage The reported error message, should the state be set to error
	 */
	protected function setState($state = 'init', $errorMessage = 'Invalid setState argument')
	{
		switch ($state)
		{
			case 'init':
				$this->isPrepared = false;
				$this->isRunning  = false;
				$this->isFinished = false;
				$this->hasRun     = false;
				break;

case 'prepared':
				$this->isPrepared = true;
				$this->isRunning  = false;
				$this->isFinished = false;
				$this->hasRun     = false;
				break;

case 'running':
				$this->isPrepared = true;
				$this->isRunning  = true;
				$this->isFinished = false;
				$this->hasRun     = false;
				break;

case 'postrun':
				$this->isPrepared = true;
				$this->isRunning  = false;
				$this->isFinished = false;
				$this->hasRun     = true;
				break;

case 'finished':
				$this->isPrepared = true;
				$this->isRunning  = false;
				$this->isFinished = true;
				$this->hasRun     = false;
				break;

case 'error':
			default:
				$this->setError($errorMessage);
				break;
		}
	}

final public function getDomain()
	{
		return $this->active_domain;
	}

final public function getStep()
	{
		return $this->active_step;
	}

final public function getSubstep()
	{
		return $this->active_substep;
	}

/**
	 * Attaches an observer object
	 *
	 * @param AKAbstractPartObserver $obs
	 */
	function attach(AKAbstractPartObserver $obs)
	{
		$this->observers["$obs"] = $obs;
	}

/**
	 * Detaches an observer object
	 *
	 * @param AKAbstractPartObserver $obs
	 */
	function detach(AKAbstractPartObserver $obs)
	{
		unset($this->observers["$obs"]);
	}

/**
	 * Sets the BREAKFLAG, which instructs this engine part that the current step must break immediately,
	 * in fear of timing out.
	 */
	protected function setBreakFlag()
	{
		AKFactory::set('volatile.breakflag', true);
	}

final protected function setDomain($new_domain)
	{
		$this->active_domain = $new_domain;
	}

final protected function setStep($new_step)
	{
		$this->active_step = $new_step;
	}

final protected function setSubstep($new_substep)
	{
		$this->active_substep = $new_substep;
	}

/**
	 * Notifies observers each time something interesting happened to the part
	 *
	 * @param mixed $message The event object
	 */
	protected function notify($message)
	{
		foreach ($this->observers as $obs)
		{
			$obs->update($this, $message);
		}
	}
}

/**
 * The base class of unarchiver classes
 */
abstract class AKAbstractUnarchiver extends AKAbstractPart
{
	/** @var array List of the names of all archive parts */
	public $archiveList = array();
	/** @var int The total size of all archive parts */
	public $totalSize = array();
	/** @var array Which files to rename */
	public $renameFiles = array();
	/** @var array Which directories to rename */
	public $renameDirs = array();
	/** @var array Which files to skip */
	public $skipFiles = array();
	/** @var string Archive filename */
	protected $filename = null;
	/** @var integer Current archive part number */
	protected $currentPartNumber = -1;
	/** @var integer The offset inside the current part */
	protected $currentPartOffset = 0;
	/** @var bool Should I restore permissions? */
	protected $flagRestorePermissions = false;
	/** @var AKAbstractPostproc Post processing class */
	protected $postProcEngine = null;
	/** @var string Absolute path to prepend to extracted files */
	protected $addPath = '';
	/** @var string Absolute path to remove from extracted files */
	protected $removePath = '';
	/** @var integer Chunk size for processing */
	protected $chunkSize = 524288;

/** @var resource File pointer to the current archive part file */
	protected $fp = null;

/** @var int Run state when processing the current archive file */
	protected $runState = null;

/** @var stdClass File header data, as read by the readFileHeader() method */
	protected $fileHeader = null;

/** @var int How much of the uncompressed data we've read so far */
	protected $dataReadLength = 0;

/** @var array Unwriteable files in these directories are always ignored and do not cause errors when not extracted */
	protected $ignoreDirectories = array();

/**
	 * Wakeup function, called whenever the class is unserialized
	 */
	public function __wakeup()
	{
		if ($this->currentPartNumber >= 0 && !empty($this->archiveList[$this->currentPartNumber]))
		{
			$this->fp = @fopen($this->archiveList[$this->currentPartNumber], 'rb');
			if ((is_resource($this->fp)) && ($this->currentPartOffset > 0))
			{
				@fseek($this->fp, $this->currentPartOffset);
			}
		}
	}

/**
	 * Sleep function, called whenever the class is serialized
	 */
	public function shutdown()
	{
		if (is_resource($this->fp))
		{
			$this->currentPartOffset = @ftell($this->fp);
			@fclose($this->fp);
		}
	}

/**
	 * Is this file or directory contained in a directory we've decided to ignore
	 * write errors for? This is useful to let the extraction work despite write
	 * errors in the log, logs and tmp directories which MIGHT be used by the system
	 * on some low quality hosts and Plesk-powered hosts.
	 *
	 * @param   string $shortFilename The relative path of the file/directory in the package
	 *
	 * @return  boolean  True if it belongs in an ignored directory
	 */
	public function isIgnoredDirectory($shortFilename)
	{
		// return false;

if (substr($shortFilename, -1) == '/')
		{
			$check = rtrim($shortFilename, '/');
		}
		else
		{
			$check = dirname($shortFilename);
		}

return in_array($check, $this->ignoreDirectories);
	}

/**
	 * Implements the abstract _prepare() method
	 */
	final protected function _prepare()
	{
		if (count($this->_parametersArray) > 0)
		{
			foreach ($this->_parametersArray as $key => $value)
			{
				switch ($key)
				{
					// Archive's absolute filename
					case 'filename':
						$this->filename = $value;

// Sanity check
						if (!empty($value))
						{
							$value = strtolower($value);

if (strlen($value) > 6)
							{
								if (
									(substr($value, 0, 7) == 'http://')
									|| (substr($value, 0, 8) == 'https://')
									|| (substr($value, 0, 6) == 'ftp://')
									|| (substr($value, 0, 7) == 'ssh2://')
									|| (substr($value, 0, 6) == 'ssl://')
								)
								{
									$this->setState('error', 'Invalid archive location');
								}
							}
						}

break;

// Should I restore permissions?
					case 'restore_permissions':
						$this->flagRestorePermissions = $value;
						break;

// Should I use FTP?
					case 'post_proc':
						$this->postProcEngine = AKFactory::getPostProc($value);
						break;

// Path to add in the beginning
					case 'add_path':
						$this->addPath = $value;
						$this->addPath = str_replace('\\', '/', $this->addPath);
						$this->addPath = rtrim($this->addPath, '/');
						if (!empty($this->addPath))
						{
							$this->addPath .= '/';
						}
						break;

// Path to remove from the beginning
					case 'remove_path':
						$this->removePath = $value;
						$this->removePath = str_replace('\\', '/', $this->removePath);
						$this->removePath = rtrim($this->removePath, '/');
						if (!empty($this->removePath))
						{
							$this->removePath .= '/';
						}
						break;

// Which files to rename (hash array)
					case 'rename_files':
						$this->renameFiles = $value;
						break;

// Which files to rename (hash array)
					case 'rename_dirs':
						$this->renameDirs = $value;
						break;

// Which files to skip (indexed array)
					case 'skip_files':
						$this->skipFiles = $value;
						break;

// Which directories to ignore when we can't write files in them (indexed array)
					case 'ignoredirectories':
						$this->ignoreDirectories = $value;
						break;
				}
			}
		}

$this->scanArchives();

$this->readArchiveHeader();
		$errMessage = $this->getError();
		if (!empty($errMessage))
		{
			$this->setState('error', $errMessage);
		}
		else
		{
			$this->runState = AK_STATE_NOFILE;
			$this->setState('prepared');
		}
	}

/**
	 * Scans for archive parts
	 */
	private function scanArchives()
	{
		if (defined('KSDEBUG'))
		{
			@unlink('debug.txt');
		}
		debugMsg('Preparing to scan archives');

$privateArchiveList = array();

// Get the components of the archive filename
		$dirname         = dirname($this->filename);
		$base_extension  = $this->getBaseExtension();
		$basename        = basename($this->filename, $base_extension);
		$this->totalSize = 0;

// Scan for multiple parts until we don't find any more of them
		$count             = 0;
		$found             = true;
		$this->archiveList = array();
		while ($found)
		{
			++$count;
			$extension = substr($base_extension, 0, 2) . sprintf('%02d', $count);
			$filename  = $dirname . DIRECTORY_SEPARATOR . $basename . $extension;
			$found     = file_exists($filename);
			if ($found)
			{
				debugMsg('- Found archive ' . $filename);
				// Add yet another part, with a numeric-appended filename
				$this->archiveList[] = $filename;

$filesize = @filesize($filename);
				$this->totalSize += $filesize;

$privateArchiveList[] = array($filename, $filesize);
			}
			else
			{
				debugMsg('- Found archive ' . $this->filename);
				// Add the last part, with the regular extension
				$this->archiveList[] = $this->filename;

$filename = $this->filename;
				$filesize = @filesize($filename);
				$this->totalSize += $filesize;

$privateArchiveList[] = array($filename, $filesize);
			}
		}
		debugMsg('Total archive parts: ' . $count);

$this->currentPartNumber = -1;
		$this->currentPartOffset = 0;
		$this->runState          = AK_STATE_NOFILE;

// Send start of file notification
		$message                     = new stdClass;
		$message->type               = 'totalsize';
		$message->content            = new stdClass;
		$message->content->totalsize = $this->totalSize;
		$message->content->filelist  = $privateArchiveList;
		$this->notify($message);
	}

/**
	 * Returns the base extension of the file, e.g. '.jpa'
	 *
	 * @return string
	 */
	private function getBaseExtension()
	{
		static $baseextension;

if (empty($baseextension))
		{
			$basename      = basename($this->filename);
			$lastdot       = strrpos($basename, '.');
			$baseextension = substr($basename, $lastdot);
		}

return $baseextension;
	}

/**
	 * Concrete classes are supposed to use this method in order to read the archive's header and
	 * prepare themselves to the point of being ready to extract the first file.
	 */
	protected abstract function readArchiveHeader();

protected function _run()
	{
		if ($this->getState() == 'postrun')
		{
			return;
		}

$this->setState('running');

$timer = AKFactory::getTimer();

$status = true;
		while ($status && ($timer->getTimeLeft() > 0))
		{
			switch ($this->runState)
			{
				case AK_STATE_NOFILE:
					debugMsg(__CLASS__ . '::_run() - Reading file header');
					$status = $this->readFileHeader();
					if ($status)
					{
						// Send start of file notification
						$message                        = new stdClass;
						$message->type                  = 'startfile';
						$message->content               = new stdClass;
						$message->content->realfile     = $this->fileHeader->file;
						$message->content->file         = $this->fileHeader->file;
						$message->content->uncompressed = $this->fileHeader->uncompressed;

if (array_key_exists('realfile', get_object_vars($this->fileHeader)))
						{
							$message->content->realfile = $this->fileHeader->realFile;
						}

if (array_key_exists('compressed', get_object_vars($this->fileHeader)))
						{
							$message->content->compressed = $this->fileHeader->compressed;
						}
						else
						{
							$message->content->compressed = 0;
						}

debugMsg(__CLASS__ . '::_run() - Preparing to extract ' . $message->content->realfile);

$this->notify($message);
					}
					else
					{
						debugMsg(__CLASS__ . '::_run() - Could not read file header');
					}
					break;

case AK_STATE_HEADER:
				case AK_STATE_DATA:
					debugMsg(__CLASS__ . '::_run() - Processing file data');
					$status = $this->processFileData();
					break;

case AK_STATE_DATAREAD:
				case AK_STATE_POSTPROC:
					debugMsg(__CLASS__ . '::_run() - Calling post-processing class');
					$this->postProcEngine->timestamp = $this->fileHeader->timestamp;
					$status                          = $this->postProcEngine->process();
					$this->propagateFromObject($this->postProcEngine);
					$this->runState = AK_STATE_DONE;
					break;

case AK_STATE_DONE:
				default:
					if ($status)
					{
						debugMsg(__CLASS__ . '::_run() - Finished extracting file');
						// Send end of file notification
						$message          = new stdClass;
						$message->type    = 'endfile';
						$message->content = new stdClass;
						if (array_key_exists('realfile', get_object_vars($this->fileHeader)))
						{
							$message->content->realfile = $this->fileHeader->realFile;
						}
						else
						{
							$message->content->realfile = $this->fileHeader->file;
						}
						$message->content->file = $this->fileHeader->file;
						if (array_key_exists('compressed', get_object_vars($this->fileHeader)))
						{
							$message->content->compressed = $this->fileHeader->compressed;
						}
						else
						{
							$message->content->compressed = 0;
						}
						$message->content->uncompressed = $this->fileHeader->uncompressed;
						$this->notify($message);
					}
					$this->runState = AK_STATE_NOFILE;
					break;
			}
		}

$error = $this->getError();
		if (!$status && ($this->runState == AK_STATE_NOFILE) && empty($error))
		{
			debugMsg(__CLASS__ . '::_run() - Just finished');
			// We just finished
			$this->setState('postrun');
		}
		elseif (!empty($error))
		{
			debugMsg(__CLASS__ . '::_run() - Halted with an error:');
			debugMsg($error);
			$this->setState('error', $error);
		}
	}

/**
	 * Concrete classes must use this method to process file data. It must set $runState to AK_STATE_DATAREAD when
	 * it's finished processing the file data.
	 *
	 * @return bool True if processing the file data was successful, false if an error occurred
	 */
	protected abstract function processFileData();

protected function _finalize()
	{
		// Nothing to do
		$this->setState('finished');
	}

/**
	 * Opens the next part file for reading
	 */
	protected function nextFile()
	{
		debugMsg('Current part is ' . $this->currentPartNumber . '; opening the next part');
		++$this->currentPartNumber;

if ($this->currentPartNumber > (count($this->archiveList) - 1))
		{
			$this->setState('postrun');

return false;
		}
		else
		{
			if (is_resource($this->fp))
			{
				@fclose($this->fp);
			}
			debugMsg('Opening file ' . $this->archiveList[$this->currentPartNumber]);
			$this->fp = @fopen($this->archiveList[$this->currentPartNumber], 'rb');
			if ($this->fp === false)
			{
				debugMsg('Could not open file - crash imminent');
				$this->setError(AKText::sprintf('ERR_COULD_NOT_OPEN_ARCHIVE_PART', $this->archiveList[$this->currentPartNumber]));
			}
			fseek($this->fp, 0);
			$this->currentPartOffset = 0;

return true;
		}
	}

/**
	 * Returns true if we have reached the end of file
	 *
	 * @param $local bool True to return EOF of the local file, false (default) to return if we have reached the end of
	 *               the archive set
	 *
	 * @return bool True if we have reached End Of File
	 */
	protected function isEOF($local = false)
	{
		$eof = @feof($this->fp);

if (!$eof)
		{
			// Border case: right at the part's end (eeeek!!!). For the life of me, I don't understand why
			// feof() doesn't report true. It expects the fp to be positioned *beyond* the EOF to report
			// true. Incredible! :(
			$position = @ftell($this->fp);
			$filesize = @filesize($this->archiveList[$this->currentPartNumber]);
			if ($filesize <= 0)
			{
				// 2Gb or more files on a 32 bit version of PHP tend to get screwed up. Meh.
				$eof = false;
			}
			elseif ($position >= $filesize)
			{
				$eof = true;
			}
		}

if ($local)
		{
			return $eof;
		}
		else
		{
			return $eof && ($this->currentPartNumber >= (count($this->archiveList) - 1));
		}
	}

/**
	 * Tries to make a directory user-writable so that we can write a file to it
	 *
	 * @param $path string A path to a file
	 */
	protected function setCorrectPermissions($path)
	{
		static $rootDir = null;

if (is_null($rootDir))
		{
			$rootDir = rtrim(AKFactory::get('kickstart.setup.destdir', ''), '/\\');
		}

$directory = rtrim(dirname($path), '/\\');
		if ($directory != $rootDir)
		{
			// Is this an unwritable directory?
			if (!is_writable($directory))
			{
				$this->postProcEngine->chmod($directory, 0755);
			}
		}
		$this->postProcEngine->chmod($path, 0644);
	}

/**
	 * Reads data from the archive and notifies the observer with the 'reading' message
	 *
	 * @param $fp
	 * @param $length
	 */
	protected function fread($fp, $length = null)
	{
		if (is_numeric($length))
		{
			if ($length > 0)
			{
				$data = fread($fp, $length);
			}
			else
			{
				$data = fread($fp, PHP_INT_MAX);
			}
		}
		else
		{
			$data = fread($fp, PHP_INT_MAX);
		}
		if ($data === false)
		{
			$data = '';
		}

// Send start of file notification
		$message                  = new stdClass;
		$message->type            = 'reading';
		$message->content         = new stdClass;
		$message->content->length = strlen($data);
		$this->notify($message);

return $data;
	}

/**
	 * Removes the configured $removePath from the path $path
	 *
	 * @param   string $path The path to reduce
	 *
	 * @return  string  The reduced path
	 */
	protected function removePath($path)
	{
		if (empty($this->removePath))
		{
			return $path;
		}

if (strpos($path, $this->removePath) === 0)
		{
			$path = substr($path, strlen($this->removePath));
			$path = ltrim($path, '/\\');
		}

return $path;
	}
}

/**
 * File post processor engines base class
 */
abstract class AKAbstractPostproc extends AKAbstractObject
{
	/** @var int The UNIX timestamp of the file's desired modification date */
	public $timestamp = 0;
	/** @var string The current (real) file path we'll have to process */
	protected $filename = null;
	/** @var int The requested permissions */
	protected $perms = 0755;
	/** @var string The temporary file path we gave to the unarchiver engine */
	protected $tempFilename = null;

/**
	 * Processes the current file, e.g. moves it from temp to final location by FTP
	 */
	abstract public function process();

/**
	 * The unarchiver tells us the path to the filename it wants to extract and we give it
	 * a different path instead.
	 *
	 * @param string $filename The path to the real file
	 * @param int    $perms    The permissions we need the file to have
	 *
	 * @return string The path to the temporary file
	 */
	abstract public function processFilename($filename, $perms = 0755);

/**
	 * Recursively creates a directory if it doesn't exist
	 *
	 * @param string $dirName The directory to create
	 * @param int    $perms   The permissions to give to that directory
	 */
	abstract public function createDirRecursive($dirName, $perms);

abstract public function chmod($file, $perms);

abstract public function unlink($file);

abstract public function rmdir($directory);

abstract public function rename($from, $to);
}

/**
 * Descendants of this class can be used in the unarchiver's observer methods (attach, detach and notify)
 *
 * @author Nicholas
 *
 */
abstract class AKAbstractPartObserver
{
	abstract public function update($object, $message);
}

/**
 * Direct file writer
 */
class AKPostprocDirect extends AKAbstractPostproc
{
	public function process()
	{
		$restorePerms = AKFactory::get('kickstart.setup.restoreperms', false);
		if ($restorePerms)
		{
			@chmod($this->filename, $this->perms);
		}
		else
		{
			if (@is_file($this->filename))
			{
				@chmod($this->filename, 0644);
			}
			else
			{
				@chmod($this->filename, 0755);
			}
		}
		if ($this->timestamp > 0)
		{
			@touch($this->filename, $this->timestamp);
		}

if (substr($this->filename, -4) === '.php')
		{
			$this->clearFileInOPCache($this->filename);
		}

return true;
	}

public function processFilename($filename, $perms = 0755)
	{
		$this->perms    = $perms;
		$this->filename = $filename;

return $filename;
	}

public function createDirRecursive($dirName, $perms)
	{
		if (AKFactory::get('kickstart.setup.dryrun', '0'))
		{
			return true;
		}
		if (@mkdir($dirName, 0755, true))
		{
			@chmod($dirName, 0755);

return true;
		}

$root = AKFactory::get('kickstart.setup.destdir');
		$root = rtrim(str_replace('\\', '/', $root), '/');
		$dir  = rtrim(str_replace('\\', '/', $dirName), '/');
		if (strpos($dir, $root) === 0)
		{
			$dir = ltrim(substr($dir, strlen($root)), '/');
			$root .= '/';
		}
		else
		{
			$root = '';
		}

if (empty($dir))
		{
			return true;
		}

$dirArray = explode('/', $dir);
		$path     = '';
		foreach ($dirArray as $dir)
		{
			$path .= $dir . '/';
			$ret = is_dir($root . $path) ? true : @mkdir($root . $path);
			if (!$ret)
			{
				// Is this a file instead of a directory?
				if (is_file($root . $path))
				{
					$this->clearFileInOPCache($root . $path);
					@unlink($root . $path);
					$ret = @mkdir($root . $path);
				}
				if (!$ret)
				{
					$this->setError(AKText::sprintf('COULDNT_CREATE_DIR', $path));

return false;
				}
			}
			// Try to set new directory permissions to 0755
			@chmod($root . $path, $perms);
		}

return true;
	}

public function chmod($file, $perms)
	{
		if (AKFactory::get('kickstart.setup.dryrun', '0'))
		{
			return true;
		}

return @chmod($file, $perms);
	}

public function unlink($file)
	{
		$this->clearFileInOPCache($file);

return @unlink($file);
	}

public function rmdir($directory)
	{
		return @rmdir($directory);
	}

public function rename($from, $to)
	{
		$this->clearFileInOPCache($from);
		$ret = @rename($from, $to);
		$this->clearFileInOPCache($to);

return $ret;
	}

public function clearFileInOPCache($file){
		if (ini_get('opcache.enable')
			&& function_exists('opcache_invalidate')
			&& (!ini_get('opcache.restrict_api') || stripos(realpath($_SERVER['SCRIPT_FILENAME']), ini_get('opcache.restrict_api')) === 0))
		{
			\opcache_invalidate($file, true);
		}
	}

}

/**
 * JPA archive extraction class
 */
class AKUnarchiverJPA extends AKAbstractUnarchiver
{
	protected $archiveHeaderData = array();

protected function readArchiveHeader()
	{
		debugMsg('Preparing to read archive header');
		// Initialize header data array
		$this->archiveHeaderData = new stdClass();

// Open the first part
		debugMsg('Opening the first part');
		$this->nextFile();

// Fail for unreadable files
		if ($this->fp === false)
		{
			debugMsg('Could not open the first part');

return false;
		}

// Read the signature
		$sig = fread($this->fp, 3);

if ($sig != 'JPA')
		{
			// Not a JPA file
			debugMsg('Invalid archive signature');
			$this->setError(AKText::_('ERR_NOT_A_JPA_FILE'));

return false;
		}

// Read and parse header length
		$header_length_array = unpack('v', fread($this->fp, 2));
		$header_length       = $header_length_array[1];

// Read and parse the known portion of header data (14 bytes)
		$bin_data    = fread($this->fp, 14);
		$header_data = unpack('Cmajor/Cminor/Vcount/Vuncsize/Vcsize', $bin_data);

// Load any remaining header data (forward compatibility)
		$rest_length = $header_length - 19;

if ($rest_length > 0)
		{
			$junk = fread($this->fp, $rest_length);
		}
		else
		{
			$junk = '';
		}

// Temporary array with all the data we read
		$temp = array(
			'signature'        => $sig,
			'length'           => $header_length,
			'major'            => $header_data['major'],
			'minor'            => $header_data['minor'],
			'filecount'        => $header_data['count'],
			'uncompressedsize' => $header_data['uncsize'],
			'compressedsize'   => $header_data['csize'],
			'unknowndata'      => $junk
		);

// Array-to-object conversion
		foreach ($temp as $key => $value)
		{
			$this->archiveHeaderData->{$key} = $value;
		}

debugMsg('Header data:');
		debugMsg('Length              : ' . $header_length);
		debugMsg('Major               : ' . $header_data['major']);
		debugMsg('Minor               : ' . $header_data['minor']);
		debugMsg('File count          : ' . $header_data['count']);
		debugMsg('Uncompressed size   : ' . $header_data['uncsize']);
		debugMsg('Compressed size	  : ' . $header_data['csize']);

$this->currentPartOffset = @ftell($this->fp);

$this->dataReadLength = 0;

return true;
	}

/**
	 * Concrete classes must use this method to read the file header
	 *
	 * @return bool True if reading the file was successful, false if an error occurred or we reached end of archive
	 */
	protected function readFileHeader()
	{
		// If the current part is over, proceed to the next part please
		if ($this->isEOF(true))
		{
			debugMsg('Archive part EOF; moving to next file');
			$this->nextFile();
		}

$this->currentPartOffset = ftell($this->fp);

debugMsg("Reading file signature; part $this->currentPartNumber, offset $this->currentPartOffset");
		// Get and decode Entity Description Block
		$signature = fread($this->fp, 3);

$this->fileHeader            = new stdClass();
		$this->fileHeader->timestamp = 0;

// Check signature
		if ($signature != 'JPF')
		{
			if ($this->isEOF(true))
			{
				// This file is finished; make sure it's the last one
				$this->nextFile();

if (!$this->isEOF(false))
				{
					debugMsg('Invalid file signature before end of archive encountered');
					$this->setError(AKText::sprintf('INVALID_FILE_HEADER', $this->currentPartNumber, $this->currentPartOffset));

return false;
				}

// We're just finished
				return false;
			}
			else
			{
				$screwed = true;

if (AKFactory::get('kickstart.setup.ignoreerrors', false))
				{
					debugMsg('Invalid file block signature; launching heuristic file block signature scanner');
					$screwed = !$this->heuristicFileHeaderLocator();

if (!$screwed)
					{
						$signature = 'JPF';
					}
					else
					{
						debugMsg('Heuristics failed. Brace yourself for the imminent crash.');
					}
				}

if ($screwed)
				{
					debugMsg('Invalid file block signature');
					// This is not a file block! The archive is corrupt.
					$this->setError(AKText::sprintf('INVALID_FILE_HEADER', $this->currentPartNumber, $this->currentPartOffset));

return false;
				}
			}
		}
		// This a JPA Entity Block. Process the header.

$isBannedFile = false;

// Read length of EDB and of the Entity Path Data
		$length_array = unpack('vblocksize/vpathsize', fread($this->fp, 4));
		// Read the path data
		if ($length_array['pathsize'] > 0)
		{
			$file = fread($this->fp, $length_array['pathsize']);
		}
		else
		{
			$file = '';
		}

// Handle file renaming
		$isRenamed = false;
		if (is_array($this->renameFiles) && (count($this->renameFiles) > 0))
		{
			if (array_key_exists($file, $this->renameFiles))
			{
				$file      = $this->renameFiles[$file];
				$isRenamed = true;
			}
		}

// Handle directory renaming
		$isDirRenamed = false;
		if (is_array($this->renameDirs) && (count($this->renameDirs) > 0))
		{
			if (array_key_exists(dirname($file), $this->renameDirs))
			{
				$file         = rtrim($this->renameDirs[dirname($file)], '/') . '/' . basename($file);
				$isRenamed    = true;
				$isDirRenamed = true;
			}
		}

// Read and parse the known data portion
		$bin_data    = fread($this->fp, 14);
		$header_data = unpack('Ctype/Ccompression/Vcompsize/Vuncompsize/Vperms', $bin_data);
		// Read any unknown data
		$restBytes = $length_array['blocksize'] - (21 + $length_array['pathsize']);

if ($restBytes > 0)
		{
			// Start reading the extra fields
			while ($restBytes >= 4)
			{
				$extra_header_data = fread($this->fp, 4);
				$extra_header      = unpack('vsignature/vlength', $extra_header_data);
				$restBytes -= 4;
				$extra_header['length'] -= 4;

switch ($extra_header['signature'])
				{
					case 256:
						// File modified timestamp
						if ($extra_header['length'] > 0)
						{
							$bindata = fread($this->fp, $extra_header['length']);
							$restBytes -= $extra_header['length'];
							$timestamps                  = unpack('Vmodified', substr($bindata, 0, 4));
							$filectime                   = $timestamps['modified'];
							$this->fileHeader->timestamp = $filectime;
						}
						break;

default:
						// Unknown field
						if ($extra_header['length'] > 0)
						{
							$junk = fread($this->fp, $extra_header['length']);
							$restBytes -= $extra_header['length'];
						}
						break;
				}
			}

if ($restBytes > 0)
			{
				$junk = fread($this->fp, $restBytes);
			}
		}

$compressionType = $header_data['compression'];

// Populate the return array
		$this->fileHeader->file         = $file;
		$this->fileHeader->compressed   = $header_data['compsize'];
		$this->fileHeader->uncompressed = $header_data['uncompsize'];

switch ($header_data['type'])
		{
			case 0:
				$this->fileHeader->type = 'dir';
				break;

case 1:
				$this->fileHeader->type = 'file';
				break;

case 2:
				$this->fileHeader->type = 'link';
				break;
		}

switch ($compressionType)
		{
			case 0:
				$this->fileHeader->compression = 'none';
				break;
			case 1:
				$this->fileHeader->compression = 'gzip';
				break;
			case 2:
				$this->fileHeader->compression = 'bzip2';
				break;
		}

$this->fileHeader->permissions = $header_data['perms'];

// Find hard-coded banned files
		if ((basename($this->fileHeader->file) == ".") || (basename($this->fileHeader->file) == ".."))
		{
			$isBannedFile = true;
		}

// Also try to find banned files passed in class configuration
		if ((count($this->skipFiles) > 0) && (!$isRenamed))
		{
			if (in_array($this->fileHeader->file, $this->skipFiles))
			{
				$isBannedFile = true;
			}
		}

// If we have a banned file, let's skip it
		if ($isBannedFile)
		{
			debugMsg('Skipping file ' . $this->fileHeader->file);
			// Advance the file pointer, skipping exactly the size of the compressed data
			$seekleft = $this->fileHeader->compressed;
			while ($seekleft > 0)
			{
				// Ensure that we can seek past archive part boundaries
				$curSize = @filesize($this->archiveList[$this->currentPartNumber]);
				$curPos  = @ftell($this->fp);
				$canSeek = $curSize - $curPos;
				if ($canSeek > $seekleft)
				{
					$canSeek = $seekleft;
				}
				@fseek($this->fp, $canSeek, SEEK_CUR);
				$seekleft -= $canSeek;
				if ($seekleft)
				{
					$this->nextFile();
				}
			}

$this->currentPartOffset = @ftell($this->fp);
			$this->runState          = AK_STATE_DONE;

return true;
		}

// Remove the removePath, if any
		$this->fileHeader->file = $this->removePath($this->fileHeader->file);

// Last chance to prepend a path to the filename
		if (!empty($this->addPath) && !$isDirRenamed)
		{
			$this->fileHeader->file = $this->addPath . $this->fileHeader->file;
		}

// Get the translated path name
		$restorePerms = AKFactory::get('kickstart.setup.restoreperms', false);
		if ($this->fileHeader->type == 'file')
		{
			// Regular file; ask the postproc engine to process its filename
			if ($restorePerms)
			{
				$this->fileHeader->realFile =
					$this->postProcEngine->processFilename($this->fileHeader->file, $this->fileHeader->permissions);
			}
			else
			{
				$this->fileHeader->realFile = $this->postProcEngine->processFilename($this->fileHeader->file);
			}
		}
		elseif ($this->fileHeader->type == 'dir')
		{
			$dir = $this->fileHeader->file;

// Directory; just create it
			if ($restorePerms)
			{
				$this->postProcEngine->createDirRecursive($this->fileHeader->file, $this->fileHeader->permissions);
			}
			else
			{
				$this->postProcEngine->createDirRecursive($this->fileHeader->file, 0755);
			}
			$this->postProcEngine->processFilename(null);
		}
		else
		{
			// Symlink; do not post-process
			$this->postProcEngine->processFilename(null);
		}

$this->createDirectory();

// Header is read
		$this->runState = AK_STATE_HEADER;

$this->dataReadLength = 0;

return true;
	}

protected function heuristicFileHeaderLocator()
	{
		$ret     = false;
		$fullEOF = false;

while (!$ret && !$fullEOF)
		{
			$this->currentPartOffset = @ftell($this->fp);

if ($this->isEOF(true))
			{
				$this->nextFile();
			}

if ($this->isEOF(false))
			{
				$fullEOF = true;
				continue;
			}

// Read 512Kb
			$chunk     = fread($this->fp, 524288);
			$size_read = mb_strlen($chunk, '8bit');
			//$pos = strpos($chunk, 'JPF');
			$pos = mb_strpos($chunk, 'JPF', 0, '8bit');

if ($pos !== false)
			{
				// We found it!
				$this->currentPartOffset += $pos + 3;
				@fseek($this->fp, $this->currentPartOffset, SEEK_SET);
				$ret = true;
			}
			else
			{
				// Not yet found :(
				$this->currentPartOffset = @ftell($this->fp);
			}
		}

return $ret;
	}

/**
	 * Creates the directory this file points to
	 */
	protected function createDirectory()
	{
		if (AKFactory::get('kickstart.setup.dryrun', '0'))
		{
			return true;
		}

// Do we need to create a directory?
		if (empty($this->fileHeader->realFile))
		{
			$this->fileHeader->realFile = $this->fileHeader->file;
		}

$lastSlash = strrpos($this->fileHeader->realFile, '/');
		$dirName   = substr($this->fileHeader->realFile, 0, $lastSlash);
		$perms     = $this->flagRestorePermissions ? $this->fileHeader->permissions : 0755;
		$ignore    = AKFactory::get('kickstart.setup.ignoreerrors', false) || $this->isIgnoredDirectory($dirName);

if (($this->postProcEngine->createDirRecursive($dirName, $perms) == false) && (!$ignore))
		{
			$this->setError(AKText::sprintf('COULDNT_CREATE_DIR', $dirName));

return false;
		}
		else
		{
			return true;
		}
	}

case 'link':
				return $this->processTypeLink();
				break;

case 'file':
				switch ($this->fileHeader->compression)
				{
					case 'none':
						return $this->processTypeFileUncompressed();
						break;

case 'gzip':
					case 'bzip2':
						return $this->processTypeFileCompressedSimple();
						break;

}
				break;

default:
				debugMsg('Unknown file type ' . $this->fileHeader->type);
				break;
		}

// Unknown file type. Play dumb.
		return true;
	}

/**
	 * Process the file data of a directory entry
	 *
	 * @return bool
	 */
	private function processTypeDir()
	{
		// Directory entries in the JPA do not have file data, therefore we're done processing the entry
		$this->runState = AK_STATE_DATAREAD;

return true;
	}

/**
	 * Process the file data of a link entry
	 *
	 * @return bool
	 */
	private function processTypeLink()
	{
		$readBytes   = 0;
		$toReadBytes = 0;
		$leftBytes   = $this->fileHeader->compressed;
		$data        = '';

while ($leftBytes > 0)
		{
			$toReadBytes     = ($leftBytes > $this->chunkSize) ? $this->chunkSize : $leftBytes;
			$mydata          = $this->fread($this->fp, $toReadBytes);
			$reallyReadBytes = akstringlen($mydata);
			$data .= $mydata;
			$leftBytes -= $reallyReadBytes;

if ($reallyReadBytes < $toReadBytes)
			{
				// We read less than requested! Why? Did we hit local EOF?
				if ($this->isEOF(true) && !$this->isEOF(false))
				{
					// Yeap. Let's go to the next file
					$this->nextFile();
				}
				else
				{
					debugMsg('End of local file before reading all data with no more parts left. The archive is corrupt or truncated.');
					// Nope. The archive is corrupt
					$this->setError(AKText::_('ERR_CORRUPT_ARCHIVE'));

return false;
				}
			}
		}

$filename = isset($this->fileHeader->realFile) ? $this->fileHeader->realFile : $this->fileHeader->file;

if (!AKFactory::get('kickstart.setup.dryrun', '0'))
		{
			// Try to remove an existing file or directory by the same name
			if (file_exists($filename))
			{
				@unlink($filename);
				@rmdir($filename);
			}

// Remove any trailing slash
			if (substr($filename, -1) == '/')
			{
				$filename = substr($filename, 0, -1);
			}
			// Create the symlink - only possible within PHP context. There's no support built in the FTP protocol, so no postproc use is possible here :(
			@symlink($data, $filename);
		}

$this->runState = AK_STATE_DATAREAD;

return true; // No matter if the link was created!
	}

private function processTypeFileUncompressed()
	{
		// Uncompressed files are being processed in small chunks, to avoid timeouts
		if (($this->dataReadLength == 0) && !AKFactory::get('kickstart.setup.dryrun', '0'))
		{
			// Before processing file data, ensure permissions are adequate
			$this->setCorrectPermissions($this->fileHeader->file);
		}

// Open the output file
		if (!AKFactory::get('kickstart.setup.dryrun', '0'))
		{
			$ignore =
				AKFactory::get('kickstart.setup.ignoreerrors', false) || $this->isIgnoredDirectory($this->fileHeader->file);

if ($this->dataReadLength == 0)
			{
				$outfp = @fopen($this->fileHeader->realFile, 'wb');
			}
			else
			{
				$outfp = @fopen($this->fileHeader->realFile, 'ab');
			}

// Can we write to the file?
			if (($outfp === false) && (!$ignore))
			{
				// An error occurred
				debugMsg('Could not write to output file');
				$this->setError(AKText::sprintf('COULDNT_WRITE_FILE', $this->fileHeader->realFile));

return false;
			}
		}

// Does the file have any data, at all?
		if ($this->fileHeader->compressed == 0)
		{
			// No file data!
			if (!AKFactory::get('kickstart.setup.dryrun', '0') && is_resource($outfp))
			{
				@fclose($outfp);
			}

$this->runState = AK_STATE_DATAREAD;

return true;
		}

// Reference to the global timer
		$timer = AKFactory::getTimer();

$toReadBytes = 0;
		$leftBytes   = $this->fileHeader->compressed - $this->dataReadLength;

// Loop while there's data to read and enough time to do it
		while (($leftBytes > 0) && ($timer->getTimeLeft() > 0))
		{
			$toReadBytes     = ($leftBytes > $this->chunkSize) ? $this->chunkSize : $leftBytes;
			$data            = $this->fread($this->fp, $toReadBytes);
			$reallyReadBytes = akstringlen($data);
			$leftBytes -= $reallyReadBytes;
			$this->dataReadLength += $reallyReadBytes;

if ($reallyReadBytes < $toReadBytes)
			{
				// We read less than requested! Why? Did we hit local EOF?
				if ($this->isEOF(true) && !$this->isEOF(false))
				{
					// Yeap. Let's go to the next file
					$this->nextFile();
				}
				else
				{
					// Nope. The archive is corrupt
					debugMsg('Not enough data in file. The archive is truncated or corrupt.');
					$this->setError(AKText::_('ERR_CORRUPT_ARCHIVE'));

return false;
				}
			}

if (!AKFactory::get('kickstart.setup.dryrun', '0'))
			{
				if (is_resource($outfp))
				{
					@fwrite($outfp, $data);
				}
			}
		}

// Close the file pointer
		if (!AKFactory::get('kickstart.setup.dryrun', '0'))
		{
			if (is_resource($outfp))
			{
				@fclose($outfp);
			}
		}

// Was this a pre-timeout bail out?
		if ($leftBytes > 0)
		{
			$this->runState = AK_STATE_DATA;
		}
		else
		{
			// Oh! We just finished!
			$this->runState       = AK_STATE_DATAREAD;
			$this->dataReadLength = 0;
		}

return true;
	}

private function processTypeFileCompressedSimple()
	{
		if (!AKFactory::get('kickstart.setup.dryrun', '0'))
		{
			// Before processing file data, ensure permissions are adequate
			$this->setCorrectPermissions($this->fileHeader->file);

// Open the output file
			$outfp = @fopen($this->fileHeader->realFile, 'wb');

// Can we write to the file?
			$ignore =
				AKFactory::get('kickstart.setup.ignoreerrors', false) || $this->isIgnoredDirectory($this->fileHeader->file);

if (($outfp === false) && (!$ignore))
			{
				// An error occurred
				debugMsg('Could not write to output file');
				$this->setError(AKText::sprintf('COULDNT_WRITE_FILE', $this->fileHeader->realFile));

return false;
			}
		}

// Does the file have any data, at all?
		if ($this->fileHeader->compressed == 0)
		{
			// No file data!
			if (!AKFactory::get('kickstart.setup.dryrun', '0'))
			{
				if (is_resource($outfp))
				{
					@fclose($outfp);
				}
			}
			$this->runState = AK_STATE_DATAREAD;

return true;
		}

// Simple compressed files are processed as a whole; we can't do chunk processing
		$zipData = $this->fread($this->fp, $this->fileHeader->compressed);
		while (akstringlen($zipData) < $this->fileHeader->compressed)
		{
			// End of local file before reading all data, but have more archive parts?
			if ($this->isEOF(true) && !$this->isEOF(false))
			{
				// Yeap. Read from the next file
				$this->nextFile();
				$bytes_left = $this->fileHeader->compressed - akstringlen($zipData);
				$zipData .= $this->fread($this->fp, $bytes_left);
			}
			else
			{
				debugMsg('End of local file before reading all data with no more parts left. The archive is corrupt or truncated.');
				$this->setError(AKText::_('ERR_CORRUPT_ARCHIVE'));

return false;
			}
		}

if ($this->fileHeader->compression == 'gzip')
		{
			$unzipData = gzinflate($zipData);
		}
		elseif ($this->fileHeader->compression == 'bzip2')
		{
			$unzipData = bzdecompress($zipData);
		}
		unset($zipData);

// Write to the file.
		if (!AKFactory::get('kickstart.setup.dryrun', '0') && is_resource($outfp))
		{
			@fwrite($outfp, $unzipData, $this->fileHeader->uncompressed);
			@fclose($outfp);
		}
		unset($unzipData);

$this->runState = AK_STATE_DATAREAD;

return true;
	}
}

/**
 * ZIP archive extraction class
 *
 * Since the file data portion of ZIP and JPA are similarly structured (it's empty for dirs,
 * linked node name for symlinks, dumped binary data for no compressions and dumped gzipped
 * binary data for gzip compression) we just have to subclass AKUnarchiverJPA and change the
 * header reading bits. Reusable code ;)
 */
class AKUnarchiverZIP extends AKUnarchiverJPA
{
	var $expectDataDescriptor = false;

protected function readArchiveHeader()
	{
		debugMsg('Preparing to read archive header');
		// Initialize header data array
		$this->archiveHeaderData = new stdClass();

// Open the first part
		debugMsg('Opening the first part');
		$this->nextFile();

// Fail for unreadable files
		if ($this->fp === false)
		{
			debugMsg('The first part is not readable');

return false;
		}

// Read a possible multipart signature
		$sigBinary  = fread($this->fp, 4);
		$headerData = unpack('Vsig', $sigBinary);

// Roll back if it's not a multipart archive
		if ($headerData['sig'] == 0x04034b50)
		{
			debugMsg('The archive is not multipart');
			fseek($this->fp, -4, SEEK_CUR);
		}
		else
		{
			debugMsg('The archive is multipart');
		}

$multiPartSigs = array(
			0x08074b50,        // Multi-part ZIP
			0x30304b50,        // Multi-part ZIP (alternate)
			0x04034b50        // Single file
		);
		if (!in_array($headerData['sig'], $multiPartSigs))
		{
			debugMsg('Invalid header signature ' . dechex($headerData['sig']));
			$this->setError(AKText::_('ERR_CORRUPT_ARCHIVE'));

return false;
		}

$this->currentPartOffset = @ftell($this->fp);
		debugMsg('Current part offset after reading header: ' . $this->currentPartOffset);

$this->dataReadLength = 0;

return true;
	}

/**
	 * Concrete classes must use this method to read the file header
	 *
	 * @return bool True if reading the file was successful, false if an error occurred or we reached end of archive
	 */
	protected function readFileHeader()
	{
		// If the current part is over, proceed to the next part please
		if ($this->isEOF(true))
		{
			debugMsg('Opening next archive part');
			$this->nextFile();
		}

$this->currentPartOffset = ftell($this->fp);

if ($this->expectDataDescriptor)
		{
			// The last file had bit 3 of the general purpose bit flag set. This means that we have a
			// 12 byte data descriptor we need to skip. To make things worse, there might also be a 4
			// byte optional data descriptor header (0x08074b50).
			$junk = @fread($this->fp, 4);
			$junk = unpack('Vsig', $junk);
			if ($junk['sig'] == 0x08074b50)
			{
				// Yes, there was a signature
				$junk = @fread($this->fp, 12);
				debugMsg('Data descriptor (w/ header) skipped at ' . (ftell($this->fp) - 12));
			}
			else
			{
				// No, there was no signature, just read another 8 bytes
				$junk = @fread($this->fp, 8);
				debugMsg('Data descriptor (w/out header) skipped at ' . (ftell($this->fp) - 8));
			}

// And check for EOF, too
			if ($this->isEOF(true))
			{
				debugMsg('EOF before reading header');

$this->nextFile();
			}
		}

// Get and decode Local File Header
		$headerBinary = fread($this->fp, 30);
		$headerData   =
			unpack('Vsig/C2ver/vbitflag/vcompmethod/vlastmodtime/vlastmoddate/Vcrc/Vcompsize/Vuncomp/vfnamelen/veflen', $headerBinary);

// Check signature
		if (!($headerData['sig'] == 0x04034b50))
		{
			debugMsg('Not a file signature at ' . (ftell($this->fp) - 4));

// The signature is not the one used for files. Is this a central directory record (i.e. we're done)?
			if ($headerData['sig'] == 0x02014b50)
			{
				debugMsg('EOCD signature at ' . (ftell($this->fp) - 4));
				// End of ZIP file detected. We'll just skip to the end of file...
				while ($this->nextFile())
				{
				}
				@fseek($this->fp, 0, SEEK_END); // Go to EOF
				return false;
			}
			else
			{
				debugMsg('Invalid signature ' . dechex($headerData['sig']) . ' at ' . ftell($this->fp));
				$this->setError(AKText::_('ERR_CORRUPT_ARCHIVE'));

return false;
			}
		}

// If bit 3 of the bitflag is set, expectDataDescriptor is true
		$this->expectDataDescriptor = ($headerData['bitflag'] & 4) == 4;

$this->fileHeader            = new stdClass();
		$this->fileHeader->timestamp = 0;

// Read the last modified data and time
		$lastmodtime = $headerData['lastmodtime'];
		$lastmoddate = $headerData['lastmoddate'];

if ($lastmoddate && $lastmodtime)
		{
			// ----- Extract time
			$v_hour    = ($lastmodtime & 0xF800) >> 11;
			$v_minute  = ($lastmodtime & 0x07E0) >> 5;
			$v_seconde = ($lastmodtime & 0x001F) * 2;

// ----- Extract date
			$v_year  = (($lastmoddate & 0xFE00) >> 9) + 1980;
			$v_month = ($lastmoddate & 0x01E0) >> 5;
			$v_day   = $lastmoddate & 0x001F;

// ----- Get UNIX date format
			$this->fileHeader->timestamp = @mktime($v_hour, $v_minute, $v_seconde, $v_month, $v_day, $v_year);
		}

$isBannedFile = false;

$this->fileHeader->compressed   = $headerData['compsize'];
		$this->fileHeader->uncompressed = $headerData['uncomp'];
		$nameFieldLength                = $headerData['fnamelen'];
		$extraFieldLength               = $headerData['eflen'];

// Read filename field
		$this->fileHeader->file = fread($this->fp, $nameFieldLength);

// Handle file renaming
		$isRenamed = false;
		if (is_array($this->renameFiles) && (count($this->renameFiles) > 0))
		{
			if (array_key_exists($this->fileHeader->file, $this->renameFiles))
			{
				$this->fileHeader->file = $this->renameFiles[$this->fileHeader->file];
				$isRenamed              = true;
			}
		}

// Handle directory renaming
		$isDirRenamed = false;
		if (is_array($this->renameDirs) && (count($this->renameDirs) > 0))
		{
			if (array_key_exists(dirname($this->fileHeader->file), $this->renameDirs))
			{
				$file         =
					rtrim($this->renameDirs[dirname($this->fileHeader->file)], '/') . '/' . basename($this->fileHeader->file);
				$isRenamed    = true;
				$isDirRenamed = true;
			}
		}

// Read extra field if present
		if ($extraFieldLength > 0)
		{
			$extrafield = fread($this->fp, $extraFieldLength);
		}

debugMsg('*' . ftell($this->fp) . ' IS START OF ' . $this->fileHeader->file . ' (' . $this->fileHeader->compressed . ' bytes)');

// Decide filetype -- Check for directories
		$this->fileHeader->type = 'file';
		if (strrpos($this->fileHeader->file, '/') == strlen($this->fileHeader->file) - 1)
		{
			$this->fileHeader->type = 'dir';
		}
		// Decide filetype -- Check for symbolic links
		if (($headerData['ver1'] == 10) && ($headerData['ver2'] == 3))
		{
			$this->fileHeader->type = 'link';
		}

switch ($headerData['compmethod'])
		{
			case 0:
				$this->fileHeader->compression = 'none';
				break;
			case 8:
				$this->fileHeader->compression = 'gzip';
				break;
		}

// Find hard-coded banned files
		if ((basename($this->fileHeader->file) == ".") || (basename($this->fileHeader->file) == ".."))
		{
			$isBannedFile = true;
		}

// If we have a banned file, let's skip it
		if ($isBannedFile)
		{
			// Advance the file pointer, skipping exactly the size of the compressed data
			$seekleft = $this->fileHeader->compressed;
			while ($seekleft > 0)
			{
				// Ensure that we can seek past archive part boundaries
				$curSize = @filesize($this->archiveList[$this->currentPartNumber]);
				$curPos  = @ftell($this->fp);
				$canSeek = $curSize - $curPos;
				if ($canSeek > $seekleft)
				{
					$canSeek = $seekleft;
				}
				@fseek($this->fp, $canSeek, SEEK_CUR);
				$seekleft -= $canSeek;
				if ($seekleft)
				{
					$this->nextFile();
				}
			}

$this->currentPartOffset = @ftell($this->fp);
			$this->runState          = AK_STATE_DONE;

return true;
		}

// Remove the removePath, if any
		$this->fileHeader->file = $this->removePath($this->fileHeader->file);

// Last chance to prepend a path to the filename
		if (!empty($this->addPath) && !$isDirRenamed)
		{
			$this->fileHeader->file = $this->addPath . $this->fileHeader->file;
		}

// Get the translated path name
		if ($this->fileHeader->type == 'file')
		{
			$this->fileHeader->realFile = $this->postProcEngine->processFilename($this->fileHeader->file);
		}
		elseif ($this->fileHeader->type == 'dir')
		{
			$this->fileHeader->timestamp = 0;

$dir = $this->fileHeader->file;

$this->postProcEngine->createDirRecursive($this->fileHeader->file, 0755);
			$this->postProcEngine->processFilename(null);
		}
		else
		{
			// Symlink; do not post-process
			$this->fileHeader->timestamp = 0;
			$this->postProcEngine->processFilename(null);
		}

$this->createDirectory();

// Header is read
		$this->runState = AK_STATE_HEADER;

return true;
	}

}

/**
 * Timer class
 */
class AKCoreTimer extends AKAbstractObject
{
	/** @var int Maximum execution time allowance per step */
	private $max_exec_time = null;

/** @var int Timestamp of execution start */
	private $start_time = null;

/**
	 * Public constructor, creates the timer object and calculates the execution time limits
	 */
	public function __construct()
	{
		// Initialize start time
		$this->start_time = $this->microtime_float();

// Get configured max time per step and bias
		$config_max_exec_time = AKFactory::get('kickstart.tuning.max_exec_time', 14);
		$bias                 = AKFactory::get('kickstart.tuning.run_time_bias', 75) / 100;

// Get PHP's maximum execution time (our upper limit)
		if (@function_exists('ini_get'))
		{
			$php_max_exec_time = @ini_get("maximum_execution_time");
			if ((!is_numeric($php_max_exec_time)) || ($php_max_exec_time == 0))
			{
				// If we have no time limit, set a hard limit of about 10 seconds
				// (safe for Apache and IIS timeouts, verbose enough for users)
				$php_max_exec_time = 14;
			}
		}
		else
		{
			// If ini_get is not available, use a rough default
			$php_max_exec_time = 14;
		}

// Apply an arbitrary correction to counter CMS load time
		$php_max_exec_time--;

// Apply bias
		$php_max_exec_time    = $php_max_exec_time * $bias;
		$config_max_exec_time = $config_max_exec_time * $bias;

// Use the most appropriate time limit value
		if ($config_max_exec_time > $php_max_exec_time)
		{
			$this->max_exec_time = $php_max_exec_time;
		}
		else
		{
			$this->max_exec_time = $config_max_exec_time;
		}
	}

/**
	 * Returns the current timestampt in decimal seconds
	 */
	private function microtime_float()
	{
		list($usec, $sec) = explode(" ", microtime());

return ((float) $usec + (float) $sec);
	}

/**
	 * Wake-up function to reset internal timer when we get unserialized
	 */
	public function __wakeup()
	{
		// Re-initialize start time on wake-up
		$this->start_time = $this->microtime_float();
	}

/**
	 * Gets the number of seconds left, before we hit the "must break" threshold
	 *
	 * @return float
	 */
	public function getTimeLeft()
	{
		return $this->max_exec_time - $this->getRunningTime();
	}

/**
	 * Gets the time elapsed since object creation/unserialization, effectively how
	 * long Akeeba Engine has been processing data
	 *
	 * @return float
	 */
	public function getRunningTime()
	{
		return $this->microtime_float() - $this->start_time;
	}

/**
	 * Enforce the minimum execution time
	 */
	public function enforce_min_exec_time()
	{
		// Try to get a sane value for PHP's maximum_execution_time INI parameter
		if (@function_exists('ini_get'))
		{
			$php_max_exec = @ini_get("maximum_execution_time");
		}
		else
		{
			$php_max_exec = 10;
		}
		if (($php_max_exec == "") || ($php_max_exec == 0))
		{
			$php_max_exec = 10;
		}
		// Decrease $php_max_exec time by 500 msec we need (approx.) to tear down
		// the application, as well as another 500msec added for rounding
		// error purposes. Also make sure this is never gonna be less than 0.
		$php_max_exec = max($php_max_exec * 1000 - 1000, 0);

// Get the "minimum execution time per step" Akeeba Backup configuration variable
		$minexectime = AKFactory::get('kickstart.tuning.min_exec_time', 0);
		if (!is_numeric($minexectime))
		{
			$minexectime = 0;
		}

// Make sure we are not over PHP's time limit!
		if ($minexectime > $php_max_exec)
		{
			$minexectime = $php_max_exec;
		}

// Get current running time
		$elapsed_time = $this->getRunningTime() * 1000;

// Only run a sleep delay if we haven't reached the minexectime execution time
		if (($minexectime > $elapsed_time) && ($elapsed_time > 0))
		{
			$sleep_msec = $minexectime - $elapsed_time;
			if (function_exists('usleep'))
			{
				usleep(1000 * $sleep_msec);
			}
			elseif (function_exists('time_nanosleep'))
			{
				$sleep_sec  = floor($sleep_msec / 1000);
				$sleep_nsec = 1000000 * ($sleep_msec - ($sleep_sec * 1000));
				time_nanosleep($sleep_sec, $sleep_nsec);
			}
			elseif (function_exists('time_sleep_until'))
			{
				$until_timestamp = time() + $sleep_msec / 1000;
				time_sleep_until($until_timestamp);
			}
			elseif (function_exists('sleep'))
			{
				$sleep_sec = ceil($sleep_msec / 1000);
				sleep($sleep_sec);
			}
		}
		elseif ($elapsed_time > 0)
		{
			// No sleep required, even if user configured us to be able to do so.
		}
	}

/**
	 * Reset the timer. It should only be used in CLI mode!
	 */
	public function resetTime()
	{
		$this->start_time = $this->microtime_float();
	}

/**
	 * @param int $max_exec_time
	 */
	public function setMaxExecTime($max_exec_time)
	{
		$this->max_exec_time = $max_exec_time;
	}
}

/**
 * A filesystem scanner which uses opendir()
 */
class AKUtilsLister extends AKAbstractObject
{
	public function &getFiles($folder, $pattern = '*')
	{
		// Initialize variables
		$arr   = array();
		$false = false;

if (!is_dir($folder))
		{
			return $false;
		}

$handle = @opendir($folder);
		// If directory is not accessible, just return FALSE
		if ($handle === false)
		{
			$this->setWarning('Unreadable directory ' . $folder);

return $false;
		}

while (($file = @readdir($handle)) !== false)
		{
			if (!fnmatch($pattern, $file))
			{
				continue;
			}

if (($file != '.') && ($file != '..'))
			{
				$ds    =
					($folder == '') || ($folder == '/') || (@substr($folder, -1) == '/') || (@substr($folder, -1) == DIRECTORY_SEPARATOR) ?
						'' : DIRECTORY_SEPARATOR;
				$dir   = $folder . $ds . $file;
				$isDir = is_dir($dir);
				if (!$isDir)
				{
					$arr[] = $dir;
				}
			}
		}
		@closedir($handle);

return $arr;
	}

public function &getFolders($folder, $pattern = '*')
	{
		// Initialize variables
		$arr   = array();
		$false = false;

if (!is_dir($folder))
		{
			return $false;
		}

$handle = @opendir($folder);
		// If directory is not accessible, just return FALSE
		if ($handle === false)
		{
			$this->setWarning('Unreadable directory ' . $folder);

return $false;
		}

while (($file = @readdir($handle)) !== false)
		{
			if (!fnmatch($pattern, $file))
			{
				continue;
			}

if (($file != '.') && ($file != '..'))
			{
				$ds    =
					($folder == '') || ($folder == '/') || (@substr($folder, -1) == '/') || (@substr($folder, -1) == DIRECTORY_SEPARATOR) ?
						'' : DIRECTORY_SEPARATOR;
				$dir   = $folder . $ds . $file;
				$isDir = is_dir($dir);
				if ($isDir)
				{
					$arr[] = $dir;
				}
			}
		}
		@closedir($handle);

return $arr;
	}
}

/**
 * A simple INI-based i18n engine
 */
class AKText extends AKAbstractObject
{
	/**
	 * The default (en_GB) translation used when no other translation is available
	 *
	 * @var array
	 */
	private $default_translation = array(
		'ERR_NOT_A_JPA_FILE'              => 'The file is not a JPA archive',
		'ERR_CORRUPT_ARCHIVE'             => 'The archive file is corrupt, truncated or archive parts are missing',
		'ERR_INVALID_LOGIN'               => 'Invalid login',
		'COULDNT_CREATE_DIR'              => 'Could not create %s folder',
		'COULDNT_WRITE_FILE'              => 'Could not open %s for writing.',
		'INVALID_FILE_HEADER'             => 'Invalid header in archive file, part %s, offset %s',
		'ERR_COULD_NOT_OPEN_ARCHIVE_PART' => 'Could not open archive part file %s for reading. Check that the file exists, is readable by the web server and is not in a directory made out of reach by chroot, open_basedir restrictions or any other restriction put in place by your host.',
	);

/**
	 * The array holding the translation keys
	 *
	 * @var array
	 */
	private $strings;

/**
	 * The currently detected language (ISO code)
	 *
	 * @var string
	 */
	private $language;

/*
	 * Initializes the translation engine
	 * @return AKText
	 */
	public function __construct()
	{
		// Start with the default translation
		$this->strings = $this->default_translation;
		// Try loading the translation file in English, if it exists
		$this->loadTranslation('en-GB');
		// Try loading the translation file in the browser's preferred language, if it exists
		$this->getBrowserLanguage();
		if (!is_null($this->language))
		{
			$this->loadTranslation();
		}
	}

private function loadTranslation($lang = null)
	{
		if (defined('KSLANGDIR'))
		{
			$dirname = KSLANGDIR;
		}
		else
		{
			$dirname = KSROOTDIR;
		}
		$basename = basename(__FILE__, '.php') . '.ini';
		if (empty($lang))
		{
			$lang = $this->language;
		}

$translationFilename = $dirname . DIRECTORY_SEPARATOR . $lang . '.' . $basename;
		if (!@file_exists($translationFilename) && ($basename != 'kickstart.ini'))
		{
			$basename            = 'kickstart.ini';
			$translationFilename = $dirname . DIRECTORY_SEPARATOR . $lang . '.' . $basename;
		}
		if (!@file_exists($translationFilename))
		{
			return;
		}
		$temp = self::parse_ini_file($translationFilename, false);

if (!is_array($this->strings))
		{
			$this->strings = array();
		}
		if (empty($temp))
		{
			$this->strings = array_merge($this->default_translation, $this->strings);
		}
		else
		{
			$this->strings = array_merge($this->strings, $temp);
		}
	}

/**
	 * A PHP based INI file parser.
	 *
	 * Thanks to asohn ~at~ aircanopy ~dot~ net for posting this handy function on
	 * the parse_ini_file page on http://gr.php.net/parse_ini_file
	 *
	 * @param string $file             Filename to process
	 * @param bool   $process_sections True to also process INI sections
	 *
	 * @return array An associative array of sections, keys and values
	 * @access private
	 */
	public static function parse_ini_file($file, $process_sections = false, $raw_data = false)
	{
		$process_sections = ($process_sections !== true) ? false : true;

if (!$raw_data)
		{
			$ini = @file($file);
		}
		else
		{
			$ini = $file;
		}
		if (count($ini) == 0)
		{
			return array();
		}

$sections = array();
		$values   = array();
		$result   = array();
		$globals  = array();
		$i        = 0;
		if (!empty($ini))
		{
			foreach ($ini as $line)
			{
				$line = trim($line);
				$line = str_replace("\t", " ", $line);

// Comments
				if (!preg_match('/^[a-zA-Z0-9[]/', $line))
				{
					continue;
				}

// Sections
				if ($line[0] == '[')
				{
					$tmp        = explode(']', $line);
					$sections[] = trim(substr($tmp[0], 1));
					$i++;
					continue;
				}

// Key-value pair
				list($key, $value) = explode('=', $line, 2);
				$key   = trim($key);
				$value = trim($value);
				if (strstr($value, ";"))
				{
					$tmp = explode(';', $value);
					if (count($tmp) == 2)
					{
						if ((($value[0] != '"') && ($value[0] != "'")) ||
							preg_match('/^".*"\s*;/', $value) || preg_match('/^".*;[^"]*$/', $value) ||
							preg_match("/^'.*'\s*;/", $value) || preg_match("/^'.*;[^']*$/", $value)
						)
						{
							$value = $tmp[0];
						}
					}
					else
					{
						if ($value[0] == '"')
						{
							$value = preg_replace('/^"(.*)".*/', '$1', $value);
						}
						elseif ($value[0] == "'")
						{
							$value = preg_replace("/^'(.*)'.*/", '$1', $value);
						}
						else
						{
							$value = $tmp[0];
						}
					}
				}
				$value = trim($value);
				$value = trim($value, "'\"");

if ($i == 0)
				{
					if (substr($line, -1, 2) == '[]')
					{
						$globals[$key][] = $value;
					}
					else
					{
						$globals[$key] = $value;
					}
				}
				else
				{
					if (substr($line, -1, 2) == '[]')
					{
						$values[$i - 1][$key][] = $value;
					}
					else
					{
						$values[$i - 1][$key] = $value;
					}
				}
			}
		}

for ($j = 0; $j < $i; $j++)
		{
			if ($process_sections === true)
			{
				$result[$sections[$j]] = $values[$j];
			}
			else
			{
				$result[] = $values[$j];
			}
		}

return $result + $globals;
	}

public function getBrowserLanguage()
	{
		// Detection code from Full Operating system language detection, by Harald Hope
		// Retrieved from http://techpatterns.com/downloads/php_language_detection.php
		$user_languages = array();
		//check to see if language is set
		if (isset($_SERVER["HTTP_ACCEPT_LANGUAGE"]))
		{
			$languages = strtolower($_SERVER["HTTP_ACCEPT_LANGUAGE"]);
			// $languages = ' fr-ch;q=0.3, da, en-us;q=0.8, en;q=0.5, fr;q=0.3';
			// need to remove spaces from strings to avoid error
			$languages = str_replace(' ', '', $languages);
			$languages = explode(",", $languages);

foreach ($languages as $language_list)
			{
				// pull out the language, place languages into array of full and primary
				// string structure:
				$temp_array = array();
				// slice out the part before ; on first step, the part before - on second, place into array
				$temp_array[0] = substr($language_list, 0, strcspn($language_list, ';'));//full language
				$temp_array[1] = substr($language_list, 0, 2);// cut out primary language
				if ((strlen($temp_array[0]) == 5) && ((substr($temp_array[0], 2, 1) == '-') || (substr($temp_array[0], 2, 1) == '_')))
				{
					$langLocation  = strtoupper(substr($temp_array[0], 3, 2));
					$temp_array[0] = $temp_array[1] . '-' . $langLocation;
				}
				//place this array into main $user_languages language array
				$user_languages[] = $temp_array;
			}
		}
		else// if no languages found
		{
			$user_languages[0] = array('', ''); //return blank array.
		}

$this->language = null;
		$basename       = basename(__FILE__, '.php') . '.ini';

// Try to match main language part of the filename, irrespective of the location, e.g. de_DE will do if de_CH doesn't exist.
		if (class_exists('AKUtilsLister'))
		{
			$fs       = new AKUtilsLister();
			$iniFiles = $fs->getFiles(KSROOTDIR, '*.' . $basename);
			if (empty($iniFiles) && ($basename != 'kickstart.ini'))
			{
				$basename = 'kickstart.ini';
				$iniFiles = $fs->getFiles(KSROOTDIR, '*.' . $basename);
			}
		}
		else
		{
			$iniFiles = null;
		}

if (is_array($iniFiles))
		{
			foreach ($user_languages as $languageStruct)
			{
				if (is_null($this->language))
				{
					// Get files matching the main lang part
					$iniFiles = $fs->getFiles(KSROOTDIR, $languageStruct[1] . '-??.' . $basename);
					if (count($iniFiles) > 0)
					{
						$filename       = $iniFiles[0];
						$filename       = substr($filename, strlen(KSROOTDIR) + 1);
						$this->language = substr($filename, 0, 5);
					}
					else
					{
						$this->language = null;
					}
				}
			}
		}

if (is_null($this->language))
		{
			// Try to find a full language match
			foreach ($user_languages as $languageStruct)
			{
				if (@file_exists($languageStruct[0] . '.' . $basename) && is_null($this->language))
				{
					$this->language = $languageStruct[0];
				}
			}
		}
		else
		{
			// Do we have an exact match?
			foreach ($user_languages as $languageStruct)
			{
				if (substr($this->language, 0, strlen($languageStruct[1])) == $languageStruct[1])
				{
					if (file_exists($languageStruct[0] . '.' . $basename))
					{
						$this->language = $languageStruct[0];
					}
				}
			}
		}

// Now, scan for full language based on the partial match

}

public static function sprintf($key)
	{
		$text = self::getInstance();
		$args = func_get_args();
		if (count($args) > 0)
		{
			$args[0] = $text->_($args[0]);

return @call_user_func_array('sprintf', $args);
		}

return '';
	}

/**
	 * Singleton pattern for Language
	 *
	 * @return AKText The global AKText instance
	 */
	public static function &getInstance()
	{
		static $instance;

if (!is_object($instance))
		{
			$instance = new AKText();
		}

return $instance;
	}

public static function _($string)
	{
		$text = self::getInstance();

$key = strtoupper($string);
		$key = substr($key, 0, 1) == '_' ? substr($key, 1) : $key;

if (isset ($text->strings[$key]))
		{
			$string = $text->strings[$key];
		}
		else
		{
			if (defined($string))
			{
				$string = constant($string);
			}
		}

return $string;
	}

public function dumpLanguage()
	{
		$out = '';
		foreach ($this->strings as $key => $value)
		{
			$out .= "$key=$value\n";
		}

return $out;
	}

public function asJavascript()
	{
		$out = '';
		foreach ($this->strings as $key => $value)
		{
			$key   = addcslashes($key, '\\\'"');
			$value = addcslashes($value, '\\\'"');
			if (!empty($out))
			{
				$out .= ",\n";
			}
			$out .= "'$key':\t'$value'";
		}

return $out;
	}

public function resetTranslation()
	{
		$this->strings = $this->default_translation;
	}

public function addDefaultLanguageStrings($stringList = array())
	{
		if (!is_array($stringList))
		{
			return;
		}
		if (empty($stringList))
		{
			return;
		}

$this->strings = array_merge($stringList, $this->strings);
	}
}

/**
 * The Akeeba Kickstart Factory class
 * This class is reponssible for instanciating all Akeeba Kicsktart classes
 */
class AKFactory
{
	/** @var   array  A list of instantiated objects */
	private $objectlist = array();

/** @var   array  Simple hash data storage */
	private $varlist = array();

/** @var   self   Static instance */
	private static $instance = null;

/** Private constructor makes sure we can't directly instantiate the class */
	private function __construct()
	{
	}

/**
	 * Gets a serialized snapshot of the Factory for safekeeping (hibernate)
	 *
	 * @return string The serialized snapshot of the Factory
	 */
	public static function serialize()
	{
		$engine = self::getUnarchiver();
		$engine->shutdown();
		$serialized = serialize(self::getInstance());

if (function_exists('base64_encode') && function_exists('base64_decode'))
		{
			$serialized = base64_encode($serialized);
		}

return $serialized;
	}

/**
	 * Gets the unarchiver engine
	 */
	public static function &getUnarchiver($configOverride = null)
	{
		static $class_name;

if (!empty($configOverride))
		{
			if ($configOverride['reset'])
			{
				$class_name = null;
			}
		}

if (empty($class_name))
		{
			$filetype = self::get('kickstart.setup.filetype', null);

if (empty($filetype))
			{
				$filename      = self::get('kickstart.setup.sourcefile', null);
				$basename      = basename($filename);
				$baseextension = strtoupper(substr($basename, -3));
				switch ($baseextension)
				{
					case 'JPA':
						$filetype = 'JPA';
						break;

case 'JPS':
						$filetype = 'JPS';
						break;

case 'ZIP':
						$filetype = 'ZIP';
						break;

default:
						die('Invalid archive type or extension in file ' . $filename);
						break;
				}
			}

$class_name = 'AKUnarchiver' . ucfirst($filetype);
		}

$destdir = self::get('kickstart.setup.destdir', null);
		if (empty($destdir))
		{
			$destdir = KSROOTDIR;
		}

$object = self::getClassInstance($class_name);
		if ($object->getState() == 'init')
		{
			$sourcePath = self::get('kickstart.setup.sourcepath', '');
			$sourceFile = self::get('kickstart.setup.sourcefile', '');

if (!empty($sourcePath))
			{
				$sourceFile = rtrim($sourcePath, '/\\') . '/' . $sourceFile;
			}

// Initialize the object –– Any change here MUST be reflected to echoHeadJavascript (default values)
			$config = array(
				'filename'            => $sourceFile,
				'restore_permissions' => self::get('kickstart.setup.restoreperms', 0),
				'post_proc'           => self::get('kickstart.procengine', 'direct'),
				'add_path'            => self::get('kickstart.setup.targetpath', $destdir),
				'remove_path'         => self::get('kickstart.setup.removepath', ''),
				'rename_files'        => self::get('kickstart.setup.renamefiles', array(
					'.htaccess' => 'htaccess.bak', 'php.ini' => 'php.ini.bak', 'web.config' => 'web.config.bak',
					'.user.ini' => '.user.ini.bak'
				)),
				'skip_files'          => self::get('kickstart.setup.skipfiles', array(
					basename(__FILE__), 'kickstart.php', 'abiautomation.ini', 'htaccess.bak', 'php.ini.bak',
					'cacert.pem'
				)),
				'ignoredirectories'   => self::get('kickstart.setup.ignoredirectories', array(
					'tmp', 'log', 'logs'
				)),
			);

if (!defined('KICKSTART'))
			{
				// In restore.php mode we have to exclude the restoration.php files
				$moreSkippedFiles     = array(
					// Akeeba Backup for Joomla!
					'administrator/components/com_akeeba/restoration.php',
					// Joomla! Update
					'administrator/components/com_joomlaupdate/restoration.php',
					// Akeeba Backup for WordPress
					'wp-content/plugins/akeebabackupwp/app/restoration.php',
					'wp-content/plugins/akeebabackupcorewp/app/restoration.php',
					'wp-content/plugins/akeebabackup/app/restoration.php',
					'wp-content/plugins/akeebabackupwpcore/app/restoration.php',
					// Akeeba Solo
					'app/restoration.php',
				);
				$config['skip_files'] = array_merge($config['skip_files'], $moreSkippedFiles);
			}

if (!empty($configOverride))
			{
				$config = array_merge($config, $configOverride);
			}

$object->setup($config);
		}

return $object;
	}

// ========================================================================
	// Public factory interface
	// ========================================================================

public static function get($key, $default = null)
	{
		$self = self::getInstance();

if (array_key_exists($key, $self->varlist))
		{
			return $self->varlist[$key];
		}
		else
		{
			return $default;
		}
	}

/**
	 * Gets a single, internally used instance of the Factory
	 *
	 * @param string $serialized_data [optional] Serialized data to spawn the instance from
	 *
	 * @return AKFactory A reference to the unique Factory object instance
	 */
	protected static function &getInstance($serialized_data = null)
	{
		if (!is_object(self::$instance) || !is_null($serialized_data))
		{
			if (!is_null($serialized_data))
			{
				self::$instance = unserialize($serialized_data);
			}
			else
			{
				self::$instance = new self();
			}
		}

return self::$instance;
	}

/**
	 * Internal function which instanciates a class named $class_name.
	 * The autoloader
	 *
	 * @param string $class_name
	 *
	 * @return object
	 */
	protected static function &getClassInstance($class_name)
	{
		$self = self::getInstance();

if (!isset($self->objectlist[$class_name]))
		{
			$self->objectlist[$class_name] = new $class_name;
		}

return $self->objectlist[$class_name];
	}

// ========================================================================
	// Public hash data storage interface
	// ========================================================================

/**
	 * Regenerates the full Factory state from a serialized snapshot (resume)
	 *
	 * @param string $serialized_data The serialized snapshot to resume from
	 */
	public static function unserialize($serialized_data)
	{
		if (function_exists('base64_encode') && function_exists('base64_decode'))
		{
			$serialized_data = base64_decode($serialized_data);
		}
		self::getInstance($serialized_data);
	}

/**
	 * Reset the internal factory state, freeing all previously created objects
	 */
	public static function nuke()
	{
		self::$instance = null;
	}

// ========================================================================
	// Akeeba Kickstart classes
	// ========================================================================

public static function set($key, $value)
	{
		$self                = self::getInstance();
		$self->varlist[$key] = $value;
	}

/**
	 * Gets the post processing engine
	 *
	 * @param string $proc_engine
	 */
	public static function &getPostProc($proc_engine = null)
	{
		static $class_name;
		if (empty($class_name))
		{
			if (empty($proc_engine))
			{
				$proc_engine = self::get('kickstart.procengine', 'direct');
			}
			$class_name = 'AKPostproc' . ucfirst($proc_engine);
		}

return self::getClassInstance($class_name);
	}

/**
	 * Get the a reference to the Akeeba Engine's timer
	 *
	 * @return AKCoreTimer
	 */
	public static function &getTimer()
	{
		/** @noinspection PhpIncompatibleReturnTypeInspection */
		return self::getClassInstance('AKCoreTimer');
	}

}

/**
 * Interface for AES encryption adapters
 */
interface AKEncryptionAESAdapterInterface
{
	/**
	 * Decrypts a string. Returns the raw binary ciphertext, zero-padded.
	 *
	 * @param   string       $plainText  The plaintext to encrypt
	 * @param   string       $key        The raw binary key (will be zero-padded or chopped if its size is different than the block size)
	 *
	 * @return  string  The raw encrypted binary string.
	 */
	public function decrypt($plainText, $key);

/**
	 * Returns the encryption block size in bytes
	 *
	 * @return  int
	 */
	public function getBlockSize();

/**
	 * Is this adapter supported?
	 *
	 * @return  bool
	 */
	public function isSupported();
}

/**
 * Abstract AES encryption class
 */
abstract class AKEncryptionAESAdapterAbstract
{
	/**
	 * Trims or zero-pads a key / IV
	 *
	 * @param   string $key  The key or IV to treat
	 * @param   int    $size The block size of the currently used algorithm
	 *
	 * @return  null|string  Null if $key is null, treated string of $size byte length otherwise
	 */
	public function resizeKey($key, $size)
	{
		if (empty($key))
		{
			return null;
		}

$keyLength = strlen($key);

if (function_exists('mb_strlen'))
		{
			$keyLength = mb_strlen($key, 'ASCII');
		}

if ($keyLength == $size)
		{
			return $key;
		}

if ($keyLength > $size)
		{
			if (function_exists('mb_substr'))
			{
				return mb_substr($key, 0, $size, 'ASCII');
			}

return substr($key, 0, $size);
		}

return $key . str_repeat("\0", ($size - $keyLength));
	}

/**
	 * Returns null bytes to append to the string so that it's zero padded to the specified block size
	 *
	 * @param   string $string    The binary string which will be zero padded
	 * @param   int    $blockSize The block size
	 *
	 * @return  string  The zero bytes to append to the string to zero pad it to $blockSize
	 */
	protected function getZeroPadding($string, $blockSize)
	{
		$stringSize = strlen($string);

if (function_exists('mb_strlen'))
		{
			$stringSize = mb_strlen($string, 'ASCII');
		}

if ($stringSize == $blockSize)
		{
			return '';
		}

if ($stringSize < $blockSize)
		{
			return str_repeat("\0", $blockSize - $stringSize);
		}

$paddingBytes = $stringSize % $blockSize;

return str_repeat("\0", $blockSize - $paddingBytes);
	}
}

class Mcrypt extends AKEncryptionAESAdapterAbstract implements AKEncryptionAESAdapterInterface
{
	protected $cipherType = MCRYPT_RIJNDAEL_128;

protected $cipherMode = MCRYPT_MODE_CBC;

public function decrypt($cipherText, $key)
	{
		$iv_size    = $this->getBlockSize();
		$key        = $this->resizeKey($key, $iv_size);
		$iv         = substr($cipherText, 0, $iv_size);
		$cipherText = substr($cipherText, $iv_size);
		$plainText  = mcrypt_decrypt($this->cipherType, $key, $cipherText, $this->cipherMode, $iv);

return $plainText;
	}

public function isSupported()
	{
		if (!function_exists('mcrypt_get_key_size'))
		{
			return false;
		}

if (!function_exists('mcrypt_get_iv_size'))
		{
			return false;
		}

if (!function_exists('mcrypt_create_iv'))
		{
			return false;
		}

if (!function_exists('mcrypt_encrypt'))
		{
			return false;
		}

if (!function_exists('mcrypt_decrypt'))
		{
			return false;
		}

if (!function_exists('mcrypt_list_algorithms'))
		{
			return false;
		}

if (!function_exists('hash'))
		{
			return false;
		}

if (!function_exists('hash_algos'))
		{
			return false;
		}

$algorightms = mcrypt_list_algorithms();

if (!in_array('rijndael-128', $algorightms))
		{
			return false;
		}

if (!in_array('rijndael-192', $algorightms))
		{
			return false;
		}

if (!in_array('rijndael-256', $algorightms))
		{
			return false;
		}

$algorightms = hash_algos();

if (!in_array('sha256', $algorightms))
		{
			return false;
		}

return true;
	}

public function getBlockSize()
	{
		return mcrypt_get_iv_size($this->cipherType, $this->cipherMode);
	}
}

class OpenSSL extends AKEncryptionAESAdapterAbstract implements AKEncryptionAESAdapterInterface
{
	/**
	 * The OpenSSL options for encryption / decryption
	 *
	 * @var  int
	 */
	protected $openSSLOptions = 0;

/**
	 * The encryption method to use
	 *
	 * @var  string
	 */
	protected $method = 'aes-128-cbc';

public function __construct()
	{
		$this->openSSLOptions = OPENSSL_RAW_DATA | OPENSSL_ZERO_PADDING;
	}

public function decrypt($cipherText, $key)
	{
		$iv_size    = $this->getBlockSize();
		$key        = $this->resizeKey($key, $iv_size);
		$iv         = substr($cipherText, 0, $iv_size);
		$cipherText = substr($cipherText, $iv_size);
		$plainText  = openssl_decrypt($cipherText, $this->method, $key, $this->openSSLOptions, $iv);

return $plainText;
	}

public function isSupported()
	{
		if (!function_exists('openssl_get_cipher_methods'))
		{
			return false;
		}

if (!function_exists('openssl_random_pseudo_bytes'))
		{
			return false;
		}

if (!function_exists('openssl_cipher_iv_length'))
		{
			return false;
		}

if (!function_exists('openssl_encrypt'))
		{
			return false;
		}

if (!function_exists('openssl_decrypt'))
		{
			return false;
		}

if (!function_exists('hash'))
		{
			return false;
		}

if (!function_exists('hash_algos'))
		{
			return false;
		}

$algorightms = openssl_get_cipher_methods();

if (!in_array('aes-128-cbc', $algorightms))
		{
			return false;
		}

$algorightms = hash_algos();

if (!in_array('sha256', $algorightms))
		{
			return false;
		}

return true;
	}

/**
	 * @return int
	 */
	public function getBlockSize()
	{
		return openssl_cipher_iv_length($this->method);
	}
}

/**
 * AES implementation in PHP (c) Chris Veness 2005-2016.
 * Right to use and adapt is granted for under a simple creative commons attribution
 * licence. No warranty of any form is offered.
 *
 * Heavily modified for Akeeba Backup by Nicholas K. Dionysopoulos
 * Also added AES-128 CBC mode (with mcrypt and OpenSSL) on top of AES CTR
 */
class AKEncryptionAES
{
	// Sbox is pre-computed multiplicative inverse in GF(2^8) used in SubBytes and KeyExpansion [�5.1.1]
	protected static $Sbox =
		array(0x63, 0x7c, 0x77, 0x7b, 0xf2, 0x6b, 0x6f, 0xc5, 0x30, 0x01, 0x67, 0x2b, 0xfe, 0xd7, 0xab, 0x76,
			0xca, 0x82, 0xc9, 0x7d, 0xfa, 0x59, 0x47, 0xf0, 0xad, 0xd4, 0xa2, 0xaf, 0x9c, 0xa4, 0x72, 0xc0,
			0xb7, 0xfd, 0x93, 0x26, 0x36, 0x3f, 0xf7, 0xcc, 0x34, 0xa5, 0xe5, 0xf1, 0x71, 0xd8, 0x31, 0x15,
			0x04, 0xc7, 0x23, 0xc3, 0x18, 0x96, 0x05, 0x9a, 0x07, 0x12, 0x80, 0xe2, 0xeb, 0x27, 0xb2, 0x75,
			0x09, 0x83, 0x2c, 0x1a, 0x1b, 0x6e, 0x5a, 0xa0, 0x52, 0x3b, 0xd6, 0xb3, 0x29, 0xe3, 0x2f, 0x84,
			0x53, 0xd1, 0x00, 0xed, 0x20, 0xfc, 0xb1, 0x5b, 0x6a, 0xcb, 0xbe, 0x39, 0x4a, 0x4c, 0x58, 0xcf,
			0xd0, 0xef, 0xaa, 0xfb, 0x43, 0x4d, 0x33, 0x85, 0x45, 0xf9, 0x02, 0x7f, 0x50, 0x3c, 0x9f, 0xa8,
			0x51, 0xa3, 0x40, 0x8f, 0x92, 0x9d, 0x38, 0xf5, 0xbc, 0xb6, 0xda, 0x21, 0x10, 0xff, 0xf3, 0xd2,
			0xcd, 0x0c, 0x13, 0xec, 0x5f, 0x97, 0x44, 0x17, 0xc4, 0xa7, 0x7e, 0x3d, 0x64, 0x5d, 0x19, 0x73,
			0x60, 0x81, 0x4f, 0xdc, 0x22, 0x2a, 0x90, 0x88, 0x46, 0xee, 0xb8, 0x14, 0xde, 0x5e, 0x0b, 0xdb,
			0xe0, 0x32, 0x3a, 0x0a, 0x49, 0x06, 0x24, 0x5c, 0xc2, 0xd3, 0xac, 0x62, 0x91, 0x95, 0xe4, 0x79,
			0xe7, 0xc8, 0x37, 0x6d, 0x8d, 0xd5, 0x4e, 0xa9, 0x6c, 0x56, 0xf4, 0xea, 0x65, 0x7a, 0xae, 0x08,
			0xba, 0x78, 0x25, 0x2e, 0x1c, 0xa6, 0xb4, 0xc6, 0xe8, 0xdd, 0x74, 0x1f, 0x4b, 0xbd, 0x8b, 0x8a,
			0x70, 0x3e, 0xb5, 0x66, 0x48, 0x03, 0xf6, 0x0e, 0x61, 0x35, 0x57, 0xb9, 0x86, 0xc1, 0x1d, 0x9e,
			0xe1, 0xf8, 0x98, 0x11, 0x69, 0xd9, 0x8e, 0x94, 0x9b, 0x1e, 0x87, 0xe9, 0xce, 0x55, 0x28, 0xdf,
			0x8c, 0xa1, 0x89, 0x0d, 0xbf, 0xe6, 0x42, 0x68, 0x41, 0x99, 0x2d, 0x0f, 0xb0, 0x54, 0xbb, 0x16);

// Rcon is Round Constant used for the Key Expansion [1st col is 2^(r-1) in GF(2^8)] [�5.2]
	protected static $Rcon = array(
		array(0x00, 0x00, 0x00, 0x00),
		array(0x01, 0x00, 0x00, 0x00),
		array(0x02, 0x00, 0x00, 0x00),
		array(0x04, 0x00, 0x00, 0x00),
		array(0x08, 0x00, 0x00, 0x00),
		array(0x10, 0x00, 0x00, 0x00),
		array(0x20, 0x00, 0x00, 0x00),
		array(0x40, 0x00, 0x00, 0x00),
		array(0x80, 0x00, 0x00, 0x00),
		array(0x1b, 0x00, 0x00, 0x00),
		array(0x36, 0x00, 0x00, 0x00));

protected static $passwords = array();

/**
	 * The algorithm to use for PBKDF2. Must be a supported hash_hmac algorithm. Default: sha1
	 *
	 * @var  string
	 */
	private static $pbkdf2Algorithm = 'sha1';

/**
	 * Number of iterations to use for PBKDF2
	 *
	 * @var  int
	 */
	private static $pbkdf2Iterations = 1000;

/**
	 * Should we use a static salt for PBKDF2?
	 *
	 * @var  int
	 */
	private static $pbkdf2UseStaticSalt = 0;

/**
	 * The static salt to use for PBKDF2
	 *
	 * @var  string
	 */
	private static $pbkdf2StaticSalt = "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0";

/**
	 * Encrypt a text using AES encryption in Counter mode of operation
	 *  - see http://csrc.nist.gov/publications/nistpubs/800-38a/sp800-38a.pdf
	 *
	 * Unicode multi-byte character safe
	 *
	 * @param   string $plaintext Source text to be encrypted
	 * @param   string $password  The password to use to generate a key
	 * @param   int    $nBits     Number of bits to be used in the key (128, 192, or 256)
	 *
	 * @return  string  Encrypted text
	 */
	public static function AESEncryptCtr($plaintext, $password, $nBits)
	{
		$blockSize = 16;  // block size fixed at 16 bytes / 128 bits (Nb=4) for AES
		if (!($nBits == 128 || $nBits == 192 || $nBits == 256))
		{
			return '';
		}  // standard allows 128/192/256 bit keys
		// note PHP (5) gives us plaintext and password in UTF8 encoding!

// use AES itself to encrypt password to get cipher key (using plain password as source for
		// key expansion) - gives us well encrypted key
		$nBytes  = $nBits / 8;  // no bytes in key
		$pwBytes = array();
		for ($i = 0; $i < $nBytes; $i++)
		{
			$pwBytes[$i] = ord(substr($password, $i, 1)) & 0xff;
		}
		$key = self::Cipher($pwBytes, self::KeyExpansion($pwBytes));
		$key = array_merge($key, array_slice($key, 0, $nBytes - 16));  // expand key to 16/24/32 bytes long

// initialise counter block (NIST SP800-38A �B.2): millisecond time-stamp for nonce in
		// 1st 8 bytes, block counter in 2nd 8 bytes
		$counterBlock = array();
		$nonce        = floor(microtime(true) * 1000);   // timestamp: milliseconds since 1-Jan-1970
		$nonceSec     = floor($nonce / 1000);
		$nonceMs      = $nonce % 1000;
		// encode nonce with seconds in 1st 4 bytes, and (repeated) ms part filling 2nd 4 bytes
		for ($i = 0; $i < 4; $i++)
		{
			$counterBlock[$i] = self::urs($nonceSec, $i * 8) & 0xff;
		}
		for ($i = 0; $i < 4; $i++)
		{
			$counterBlock[$i + 4] = $nonceMs & 0xff;
		}
		// and convert it to a string to go on the front of the ciphertext
		$ctrTxt = '';
		for ($i = 0; $i < 8; $i++)
		{
			$ctrTxt .= chr($counterBlock[$i]);
		}

// generate key schedule - an expansion of the key into distinct Key Rounds for each round
		$keySchedule = self::KeyExpansion($key);

$blockCount = ceil(strlen($plaintext) / $blockSize);
		$ciphertxt  = array();  // ciphertext as array of strings

for ($b = 0; $b < $blockCount; $b++)
		{
			// set counter (block #) in last 8 bytes of counter block (leaving nonce in 1st 8 bytes)
			// done in two stages for 32-bit ops: using two words allows us to go past 2^32 blocks (68GB)
			for ($c = 0; $c < 4; $c++)
			{
				$counterBlock[15 - $c] = self::urs($b, $c * 8) & 0xff;
			}
			for ($c = 0; $c < 4; $c++)
			{
				$counterBlock[15 - $c - 4] = self::urs($b / 0x100000000, $c * 8);
			}

$cipherCntr = self::Cipher($counterBlock, $keySchedule);  // -- encrypt counter block --

// block size is reduced on final block
			$blockLength = $b < $blockCount - 1 ? $blockSize : (strlen($plaintext) - 1) % $blockSize + 1;
			$cipherByte  = array();

for ($i = 0; $i < $blockLength; $i++)
			{  // -- xor plaintext with ciphered counter byte-by-byte --
				$cipherByte[$i] = $cipherCntr[$i] ^ ord(substr($plaintext, $b * $blockSize + $i, 1));
				$cipherByte[$i] = chr($cipherByte[$i]);
			}
			$ciphertxt[$b] = implode('', $cipherByte);  // escape troublesome characters in ciphertext
		}

// implode is more efficient than repeated string concatenation
		$ciphertext = $ctrTxt . implode('', $ciphertxt);
		$ciphertext = base64_encode($ciphertext);

return $ciphertext;
	}

/**
	 * AES Cipher function: encrypt 'input' with Rijndael algorithm
	 *
	 * @param   array $input    Message as byte-array (16 bytes)
	 * @param   array $w        key schedule as 2D byte-array (Nr+1 x Nb bytes) -
	 *                          generated from the cipher key by KeyExpansion()
	 *
	 * @return  string  Ciphertext as byte-array (16 bytes)
	 */
	protected static function Cipher($input, $w)
	{    // main Cipher function [�5.1]
		$Nb = 4;                 // block size (in words): no of columns in state (fixed at 4 for AES)
		$Nr = count($w) / $Nb - 1; // no of rounds: 10/12/14 for 128/192/256-bit keys

$state = array();  // initialise 4xNb byte-array 'state' with input [�3.4]
		for ($i = 0; $i < 4 * $Nb; $i++)
		{
			$state[$i % 4][floor($i / 4)] = $input[$i];
		}

$state = self::AddRoundKey($state, $w, 0, $Nb);

for ($round = 1; $round < $Nr; $round++)
		{  // apply Nr rounds
			$state = self::SubBytes($state, $Nb);
			$state = self::ShiftRows($state, $Nb);
			$state = self::MixColumns($state);
			$state = self::AddRoundKey($state, $w, $round, $Nb);
		}

$state = self::SubBytes($state, $Nb);
		$state = self::ShiftRows($state, $Nb);
		$state = self::AddRoundKey($state, $w, $Nr, $Nb);

$output = array(4 * $Nb);  // convert state to 1-d array before returning [�3.4]
		for ($i = 0; $i < 4 * $Nb; $i++)
		{
			$output[$i] = $state[$i % 4][floor($i / 4)];
		}

return $output;
	}

protected static function AddRoundKey($state, $w, $rnd, $Nb)
	{  // xor Round Key into state S [�5.1.4]
		for ($r = 0; $r < 4; $r++)
		{
			for ($c = 0; $c < $Nb; $c++)
			{
				$state[$r][$c] ^= $w[$rnd * 4 + $c][$r];
			}
		}

return $state;
	}

protected static function SubBytes($s, $Nb)
	{    // apply SBox to state S [�5.1.1]
		for ($r = 0; $r < 4; $r++)
		{
			for ($c = 0; $c < $Nb; $c++)
			{
				$s[$r][$c] = self::$Sbox[$s[$r][$c]];
			}
		}

return $s;
	}

protected static function ShiftRows($s, $Nb)
	{    // shift row r of state S left by r bytes [�5.1.2]
		$t = array(4);
		for ($r = 1; $r < 4; $r++)
		{
			for ($c = 0; $c < 4; $c++)
			{
				$t[$c] = $s[$r][($c + $r) % $Nb];
			}  // shift into temp copy
			for ($c = 0; $c < 4; $c++)
			{
				$s[$r][$c] = $t[$c];
			}         // and copy back
		}          // note that this will work for Nb=4,5,6, but not 7,8 (always 4 for AES):
		return $s;  // see fp.gladman.plus.com/cryptography_technology/rijndael/aes.spec.311.pdf
	}

protected static function MixColumns($s)
	{
		// combine bytes of each col of state S [�5.1.3]
		for ($c = 0; $c < 4; $c++)
		{
			$a = array(4);  // 'a' is a copy of the current column from 's'
			$b = array(4);  // 'b' is a�{02} in GF(2^8)

for ($i = 0; $i < 4; $i++)
			{
				$a[$i] = $s[$i][$c];
				$b[$i] = $s[$i][$c] & 0x80 ? $s[$i][$c] << 1 ^ 0x011b : $s[$i][$c] << 1;
			}

// a[n] ^ b[n] is a�{03} in GF(2^8)
			$s[0][$c] = $b[0] ^ $a[1] ^ $b[1] ^ $a[2] ^ $a[3]; // 2*a0 + 3*a1 + a2 + a3
			$s[1][$c] = $a[0] ^ $b[1] ^ $a[2] ^ $b[2] ^ $a[3]; // a0 * 2*a1 + 3*a2 + a3
			$s[2][$c] = $a[0] ^ $a[1] ^ $b[2] ^ $a[3] ^ $b[3]; // a0 + a1 + 2*a2 + 3*a3
			$s[3][$c] = $a[0] ^ $b[0] ^ $a[1] ^ $a[2] ^ $b[3]; // 3*a0 + a1 + a2 + 2*a3
		}

return $s;
	}

/**
	 * Key expansion for Rijndael Cipher(): performs key expansion on cipher key
	 * to generate a key schedule
	 *
	 * @param   array $key Cipher key byte-array (16 bytes)
	 *
	 * @return  array  Key schedule as 2D byte-array (Nr+1 x Nb bytes)
	 */
	protected static function KeyExpansion($key)
	{
		// generate Key Schedule from Cipher Key [�5.2]

// block size (in words): no of columns in state (fixed at 4 for AES)
		$Nb = 4;
		// key length (in words): 4/6/8 for 128/192/256-bit keys
		$Nk = (int) (count($key) / 4);
		// no of rounds: 10/12/14 for 128/192/256-bit keys
		$Nr = $Nk + 6;

$w    = array();
		$temp = array();

for ($i = 0; $i < $Nk; $i++)
		{
			$r     = array($key[4 * $i], $key[4 * $i + 1], $key[4 * $i + 2], $key[4 * $i + 3]);
			$w[$i] = $r;
		}

for ($i = $Nk; $i < ($Nb * ($Nr + 1)); $i++)
		{
			$w[$i] = array();
			for ($t = 0; $t < 4; $t++)
			{
				$temp[$t] = $w[$i - 1][$t];
			}
			if ($i % $Nk == 0)
			{
				$temp = self::SubWord(self::RotWord($temp));
				for ($t = 0; $t < 4; $t++)
				{
					$rConIndex = (int) ($i / $Nk);
					$temp[$t] ^= self::$Rcon[$rConIndex][$t];
				}
			}
			else if ($Nk > 6 && $i % $Nk == 4)
			{
				$temp = self::SubWord($temp);
			}
			for ($t = 0; $t < 4; $t++)
			{
				$w[$i][$t] = $w[$i - $Nk][$t] ^ $temp[$t];
			}
		}

return $w;
	}

protected static function SubWord($w)
	{    // apply SBox to 4-byte word w
		for ($i = 0; $i < 4; $i++)
		{
			$w[$i] = self::$Sbox[$w[$i]];
		}

return $w;
	}

/*
	 * Unsigned right shift function, since PHP has neither >>> operator nor unsigned ints
	 *
	 * @param a  number to be shifted (32-bit integer)
	 * @param b  number of bits to shift a to the right (0..31)
	 * @return   a right-shifted and zero-filled by b bits
	 */

protected static function RotWord($w)
	{    // rotate 4-byte word w left by one byte
		$tmp = $w[0];
		for ($i = 0; $i < 3; $i++)
		{
			$w[$i] = $w[$i + 1];
		}
		$w[3] = $tmp;

return $w;
	}

protected static function urs($a, $b)
	{
		$a &= 0xffffffff;
		$b &= 0x1f;  // (bounds check)
		if ($a & 0x80000000 && $b > 0)
		{   // if left-most bit set
			$a = ($a >> 1) & 0x7fffffff;   //   right-shift one bit & clear left-most bit
			$a = $a >> ($b - 1);           //   remaining right-shifts
		}
		else
		{                       // otherwise
			$a = ($a >> $b);               //   use normal right-shift
		}

return $a;
	}

/**
	 * Decrypt a text encrypted by AES in counter mode of operation
	 *
	 * @param   string  $ciphertext  Source text to be decrypted
	 * @param   string  $password    The password to use to generate a key
	 * @param   int     $nBits       Number of bits to be used in the key (128, 192, or 256)
	 *
	 * @return  string  Decrypted text
	 */
	public static function AESDecryptCtr($ciphertext, $password, $nBits)
	{
		$blockSize = 16;  // block size fixed at 16 bytes / 128 bits (Nb=4) for AES

if (!($nBits == 128 || $nBits == 192 || $nBits == 256))
		{
			return '';
		}

// standard allows 128/192/256 bit keys
		$ciphertext = base64_decode($ciphertext);

// use AES to encrypt password (mirroring encrypt routine)
		$nBytes  = $nBits / 8;  // no bytes in key
		$pwBytes = array();

for ($i = 0; $i < $nBytes; $i++)
		{
			$pwBytes[$i] = ord(substr($password, $i, 1)) & 0xff;
		}

$key = self::Cipher($pwBytes, self::KeyExpansion($pwBytes));
		$key = array_merge($key, array_slice($key, 0, $nBytes - 16));  // expand key to 16/24/32 bytes long

// recover nonce from 1st element of ciphertext
		$counterBlock = array();
		$ctrTxt       = substr($ciphertext, 0, 8);

for ($i = 0; $i < 8; $i++)
		{
			$counterBlock[$i] = ord(substr($ctrTxt, $i, 1));
		}

// generate key schedule
		$keySchedule = self::KeyExpansion($key);

// separate ciphertext into blocks (skipping past initial 8 bytes)
		$nBlocks = ceil((strlen($ciphertext) - 8) / $blockSize);
		$ct      = array();

for ($b = 0; $b < $nBlocks; $b++)
		{
			$ct[$b] = substr($ciphertext, 8 + $b * $blockSize, 16);
		}

$ciphertext = $ct;  // ciphertext is now array of block-length strings

// plaintext will get generated block-by-block into array of block-length strings
		$plaintxt = array();

for ($b = 0; $b < $nBlocks; $b++)
		{
			// set counter (block #) in last 8 bytes of counter block (leaving nonce in 1st 8 bytes)
			for ($c = 0; $c < 4; $c++)
			{
				$counterBlock[15 - $c] = self::urs($b, $c * 8) & 0xff;
			}

for ($c = 0; $c < 4; $c++)
			{
				$counterBlock[15 - $c - 4] = self::urs(($b + 1) / 0x100000000 - 1, $c * 8) & 0xff;
			}

$cipherCntr = self::Cipher($counterBlock, $keySchedule);  // encrypt counter block

$plaintxtByte = array();

for ($i = 0; $i < strlen($ciphertext[$b]); $i++)
			{
				// -- xor plaintext with ciphered counter byte-by-byte --
				$plaintxtByte[$i] = $cipherCntr[$i] ^ ord(substr($ciphertext[$b], $i, 1));
				$plaintxtByte[$i] = chr($plaintxtByte[$i]);

}

$plaintxt[$b] = implode('', $plaintxtByte);
		}

// join array of blocks into single plaintext string
		$plaintext = implode('', $plaintxt);

return $plaintext;
	}

/**
	 * AES decryption in CBC mode. This is the standard mode (the CTR methods
	 * actually use Rijndael-128 in CTR mode, which - technically - isn't AES).
	 *
	 * It supports AES-128 only. It assumes that the last 4 bytes
	 * contain a little-endian unsigned long integer representing the unpadded
	 * data length.
	 *
	 * @since  3.0.1
	 * @author Nicholas K. Dionysopoulos
	 *
	 * @param   string $ciphertext The data to encrypt
	 * @param   string $password   Encryption password
	 *
	 * @return  string  The plaintext
	 */
	public static function AESDecryptCBC($ciphertext, $password)
	{
		$adapter = self::getAdapter();

if (!$adapter->isSupported())
		{
			return false;
		}

// Read the data size
		$data_size = unpack('V', substr($ciphertext, -4));

// Do I have a PBKDF2 salt?
		$salt             = substr($ciphertext, -92, 68);
		$rightStringLimit = -4;

$params        = self::getKeyDerivationParameters();
		$keySizeBytes  = $params['keySize'];
		$algorithm     = $params['algorithm'];
		$iterations    = $params['iterations'];
		$useStaticSalt = $params['useStaticSalt'];

if (substr($salt, 0, 4) == 'JPST')
		{
			// We have a stored salt. Retrieve it and tell decrypt to process the string minus the last 44 bytes
			// (4 bytes for JPST, 16 bytes for the salt, 4 bytes for JPIV, 16 bytes for the IV, 4 bytes for the
			// uncompressed string length - note that using PBKDF2 means we're also using a randomized IV per the
			// format specification).
			$salt             = substr($salt, 4);
			$rightStringLimit -= 68;

$key          = self::pbkdf2($password, $salt, $algorithm, $iterations, $keySizeBytes);
		}
		elseif ($useStaticSalt)
		{
			// We have a static salt. Use it for PBKDF2.
			$key = self::getStaticSaltExpandedKey($password);
		}
		else
		{
			// Get the expanded key from the password. THIS USES THE OLD, INSECURE METHOD.
			$key = self::expandKey($password);
		}

// Try to get the IV from the data
		$iv               = substr($ciphertext, -24, 20);

if (substr($iv, 0, 4) == 'JPIV')
		{
			// We have a stored IV. Retrieve it and tell mdecrypt to process the string minus the last 24 bytes
			// (4 bytes for JPIV, 16 bytes for the IV, 4 bytes for the uncompressed string length)
			$iv               = substr($iv, 4);
			$rightStringLimit -= 20;
		}
		else
		{
			// No stored IV. Do it the dumb way.
			$iv = self::createTheWrongIV($password);
		}

// Decrypt
		$plaintext = $adapter->decrypt($iv . substr($ciphertext, 0, $rightStringLimit), $key);

// Trim padding, if necessary
		if (strlen($plaintext) > $data_size)
		{
			$plaintext = substr($plaintext, 0, $data_size);
		}

return $plaintext;
	}

/**
	 * That's the old way of creating an IV that's definitely not cryptographically sound.
	 *
	 * DO NOT USE, EVER, UNLESS YOU WANT TO DECRYPT LEGACY DATA
	 *
	 * @param   string $password The raw password from which we create an IV in a super bozo way
	 *
	 * @return  string  A 16-byte IV string
	 */
	public static function createTheWrongIV($password)
	{
		static $ivs = array();

$key = md5($password);

if (!isset($ivs[$key]))
		{
			$nBytes  = 16;  // AES uses a 128 -bit (16 byte) block size, hence the IV size is always 16 bytes
			$pwBytes = array();
			for ($i = 0; $i < $nBytes; $i++)
			{
				$pwBytes[$i] = ord(substr($password, $i, 1)) & 0xff;
			}
			$iv    = self::Cipher($pwBytes, self::KeyExpansion($pwBytes));
			$newIV = '';
			foreach ($iv as $int)
			{
				$newIV .= chr($int);
			}

$ivs[$key] = $newIV;
		}

return $ivs[$key];
	}

/**
	 * Expand the password to an appropriate 128-bit encryption key
	 *
	 * @param   string $password
	 *
	 * @return  string
	 *
	 * @since   5.2.0
	 * @author  Nicholas K. Dionysopoulos
	 */
	public static function expandKey($password)
	{
		// Try to fetch cached key or create it if it doesn't exist
		$nBits     = 128;
		$lookupKey = md5($password . '-' . $nBits);

if (array_key_exists($lookupKey, self::$passwords))
		{
			$key = self::$passwords[$lookupKey];

return $key;
		}

// use AES itself to encrypt password to get cipher key (using plain password as source for
		// key expansion) - gives us well encrypted key.
		$nBytes  = $nBits / 8; // Number of bytes in key
		$pwBytes = array();

for ($i = 0; $i < $nBytes; $i++)
		{
			$pwBytes[$i] = ord(substr($password, $i, 1)) & 0xff;
		}

$key    = self::Cipher($pwBytes, self::KeyExpansion($pwBytes));
		$key    = array_merge($key, array_slice($key, 0, $nBytes - 16)); // expand key to 16/24/32 bytes long
		$newKey = '';

foreach ($key as $int)
		{
			$newKey .= chr($int);
		}

$key = $newKey;

self::$passwords[$lookupKey] = $key;

return $key;
	}

/**
	 * Returns the correct AES-128 CBC encryption adapter
	 *
	 * @return  AKEncryptionAESAdapterInterface
	 *
	 * @since   5.2.0
	 * @author  Nicholas K. Dionysopoulos
	 */
	public static function getAdapter()
	{
		static $adapter = null;

if (is_object($adapter) && ($adapter instanceof AKEncryptionAESAdapterInterface))
		{
			return $adapter;
		}

$adapter = new OpenSSL();

if (!$adapter->isSupported())
		{
			$adapter = new Mcrypt();
		}

return $adapter;
	}

/**
	 * @return string
	 */
	public static function getPbkdf2Algorithm()
	{
		return self::$pbkdf2Algorithm;
	}

/**
	 * @param string $pbkdf2Algorithm
	 * @return void
	 */
	public static function setPbkdf2Algorithm($pbkdf2Algorithm)
	{
		self::$pbkdf2Algorithm = $pbkdf2Algorithm;
	}

/**
	 * @return int
	 */
	public static function getPbkdf2Iterations()
	{
		return self::$pbkdf2Iterations;
	}

/**
	 * @param int $pbkdf2Iterations
	 * @return void
	 */
	public static function setPbkdf2Iterations($pbkdf2Iterations)
	{
		self::$pbkdf2Iterations = $pbkdf2Iterations;
	}

/**
	 * @return int
	 */
	public static function getPbkdf2UseStaticSalt()
	{
		return self::$pbkdf2UseStaticSalt;
	}

/**
	 * @param int $pbkdf2UseStaticSalt
	 * @return void
	 */
	public static function setPbkdf2UseStaticSalt($pbkdf2UseStaticSalt)
	{
		self::$pbkdf2UseStaticSalt = $pbkdf2UseStaticSalt;
	}

/**
	 * @return string
	 */
	public static function getPbkdf2StaticSalt()
	{
		return self::$pbkdf2StaticSalt;
	}

/**
	 * @param string $pbkdf2StaticSalt
	 * @return void
	 */
	public static function setPbkdf2StaticSalt($pbkdf2StaticSalt)
	{
		self::$pbkdf2StaticSalt = $pbkdf2StaticSalt;
	}

/**
	 * Get the parameters fed into PBKDF2 to expand the user password into an encryption key. These are the static
	 * parameters (key size, hashing algorithm and number of iterations). A new salt is used for each encryption block
	 * to minimize the risk of attacks against the password.
	 *
	 * @return  array
	 */
	public static function getKeyDerivationParameters()
	{
		return array(
			'keySize'       => 16,
			'algorithm'     => self::$pbkdf2Algorithm,
			'iterations'    => self::$pbkdf2Iterations,
			'useStaticSalt' => self::$pbkdf2UseStaticSalt,
			'staticSalt'    => self::$pbkdf2StaticSalt,
		);
	}

/**
	 * PBKDF2 key derivation function as defined by RSA's PKCS #5: https://www.ietf.org/rfc/rfc2898.txt
	 *
	 * Test vectors can be found here: https://www.ietf.org/rfc/rfc6070.txt
	 *
	 * This implementation of PBKDF2 was originally created by https://defuse.ca
	 * With improvements by http://www.variations-of-shadow.com
	 * Modified for Akeeba Engine by Akeeba Ltd (removed unnecessary checks to make it faster)
	 *
	 * @param   string  $password    The password.
	 * @param   string  $salt        A salt that is unique to the password.
	 * @param   string  $algorithm   The hash algorithm to use. Default is sha1.
	 * @param   int     $count       Iteration count. Higher is better, but slower. Default: 1000.
	 * @param   int     $key_length  The length of the derived key in bytes.
	 *
	 * @return  string  A string of $key_length bytes
	 */
	public static function pbkdf2($password, $salt, $algorithm = 'sha1', $count = 1000, $key_length = 16)
	{
		if (function_exists("hash_pbkdf2"))
		{
			return hash_pbkdf2($algorithm, $password, $salt, $count, $key_length, true);
		}

$hash_length = akstringlen(hash($algorithm, "", true));
		$block_count = ceil($key_length / $hash_length);

$output = "";

for ($i = 1; $i <= $block_count; $i++)
		{
			// $i encoded as 4 bytes, big endian.
			$last = $salt . pack("N", $i);

// First iteration
			$xorResult = hash_hmac($algorithm, $last, $password, true);
			$last      = $xorResult;

// Perform the other $count - 1 iterations
			for ($j = 1; $j < $count; $j++)
			{
				$last = hash_hmac($algorithm, $last, $password, true);
				$xorResult ^= $last;
			}

$output .= $xorResult;
		}

return aksubstr($output, 0, $key_length);
	}

/**
	 * Get the expanded key from the user supplied password using a static salt. The results are cached for performance
	 * reasons.
	 *
	 * @param   string  $password  The user-supplied password, UTF-8 encoded.
	 *
	 * @return  string  The expanded key
	 */
	private static function getStaticSaltExpandedKey($password)
	{
		$params        = self::getKeyDerivationParameters();
		$keySizeBytes  = $params['keySize'];
		$algorithm     = $params['algorithm'];
		$iterations    = $params['iterations'];
		$staticSalt    = $params['staticSalt'];

$lookupKey = "PBKDF2-$algorithm-$iterations-" . md5($password . $staticSalt);

if (!array_key_exists($lookupKey, self::$passwords))
		{
			self::$passwords[$lookupKey] = self::pbkdf2($password, $staticSalt, $algorithm, $iterations, $keySizeBytes);
		}

return self::$passwords[$lookupKey];
	}

}

/**
 * The Master Setup will read the configuration parameters from restoration.php or
 * the JSON-encoded "configuration" input variable and return the status.
 *
 * @return bool True if the master configuration was applied to the Factory object
 */
function masterSetup()
{
	// ------------------------------------------------------------
	// 1. Import basic setup parameters
	// ------------------------------------------------------------

$ini_data = null;

// Require restoration.php or fail
	$setupFile = 'restoration.php';

if (!file_exists($setupFile))
	{
		AKFactory::set('kickstart.enabled', false);

return false;
	}

// Load restoration.php. It creates a global variable named $restoration_setup
	require_once $setupFile;

/** @var array $restoration_setup This is defined in the restoration.php file */
	$ini_data = $restoration_setup;

if (empty($ini_data))
	{
		// No parameters fetched. Darn, how am I supposed to work like that?!
		AKFactory::set('kickstart.enabled', false);

return false;
	}

AKFactory::set('kickstart.enabled', true);

// Import any data from the $restoration_setup array read from restoration.php
	if (!empty($ini_data))
	{
		foreach ($ini_data as $key => $value)
		{
			AKFactory::set($key, $value);
		}
		AKFactory::set('kickstart.enabled', true);
	}

// Reinitialize $ini_data
	$ini_data = null;

// ------------------------------------------------------------
	// 2. Explode JSON parameters into $_REQUEST scope
	// ------------------------------------------------------------

// Detect a JSON string in the request variable and store it.
	$json = getQueryParam('json', null);

// Remove everything from the request, post and get arrays
	if (!empty($_REQUEST))
	{
		foreach ($_REQUEST as $key => $value)
		{
			unset($_REQUEST[$key]);
		}
	}

if (!empty($_POST))
	{
		foreach ($_POST as $key => $value)
		{
			unset($_POST[$key]);
		}
	}

if (!empty($_GET))
	{
		foreach ($_GET as $key => $value)
		{
			unset($_GET[$key]);
		}
	}

// Decrypt a possibly encrypted JSON string
	$password = AKFactory::get('kickstart.security.password', null);

if (!empty($json))
	{
		if (!empty($password))
		{
			$json = AKEncryptionAES::AESDecryptCtr($json, $password, 128);

if (empty($json))
			{
				die('###{"status":false,"message":"Invalid login"}###');
			}
		}

// Get the raw data
		$raw = json_decode($json, true);

if (!empty($password) && (empty($raw)))
		{
			die('###{"status":false,"message":"Invalid login"}###');
		}

// Pass all JSON data to the request array
		if (!empty($raw))
		{
			foreach ($raw as $key => $value)
			{
				$_REQUEST[$key] = $value;
			}
		}
	}
	elseif (!empty($password))
	{
		die('###{"status":false,"message":"Invalid login"}###');
	}

// ------------------------------------------------------------
	// 3. Try the "factory" variable
	// ------------------------------------------------------------
	// A "factory" variable will override all other settings.
	$serialized = getQueryParam('factory', null);

if (!is_null($serialized))
	{
		// Get the serialized factory
		AKFactory::unserialize($serialized);
		AKFactory::set('kickstart.enabled', true);

return true;
	}

return AKFactory::get('kickstart.enabled', false);
}

// Mini-controller for restore.php
if (!defined('KICKSTART'))
{
	// The observer class, used to report number of files and bytes processed
	class RestorationObserver extends AKAbstractPartObserver
	{
		public $compressedTotal = 0;
		public $uncompressedTotal = 0;
		public $filesProcessed = 0;

public function update($object, $message)
		{
			if (!is_object($message))
			{
				return;
			}

if (!array_key_exists('type', get_object_vars($message)))
			{
				return;
			}

if ($message->type == 'startfile')
			{
				$this->filesProcessed++;
				$this->compressedTotal += $message->content->compressed;
				$this->uncompressedTotal += $message->content->uncompressed;
			}
		}

public function __toString()
		{
			return __CLASS__;
		}

}

// Import configuration
	masterSetup();

$retArray = array(
		'status'  => true,
		'message' => null
	);

$enabled = AKFactory::get('kickstart.enabled', false);

if ($enabled)
	{
		$task = getQueryParam('task');

switch ($task)
		{
			case 'ping':
				// ping task - really does nothing!
				$timer = AKFactory::getTimer();
				$timer->enforce_min_exec_time();
				break;

/**
			 * There are two separate steps here since we were using an inefficient restoration intialization method in
			 * the past. Now both startRestore and stepRestore are identical. The difference in behavior depends
			 * exclusively on the calling Javascript. If no serialized factory was passed in the request then we start a
			 * new restoration. If a serialized factory was passed in the request then the restoration is resumed. For
			 * this reason we should NEVER call AKFactory::nuke() in startRestore anymore: that would simply reset the
			 * extraction engine configuration which was done in masterSetup() leading to an error about the file being
			 * invalid (since no file is found).
			 */
			case 'startRestore':
			case 'stepRestore':
				$engine   = AKFactory::getUnarchiver(); // Get the engine
				$observer = new RestorationObserver(); // Create a new observer
				$engine->attach($observer); // Attach the observer
				$engine->tick();
				$ret = $engine->getStatusArray();

if ($ret['Error'] != '')
				{
					$retArray['status']  = false;
					$retArray['done']    = true;
					$retArray['message'] = $ret['Error'];
				}
				elseif (!$ret['HasRun'])
				{
					$retArray['files']    = $observer->filesProcessed;
					$retArray['bytesIn']  = $observer->compressedTotal;
					$retArray['bytesOut'] = $observer->uncompressedTotal;
					$retArray['status']   = true;
					$retArray['done']     = true;
				}
				else
				{
					$retArray['files']    = $observer->filesProcessed;
					$retArray['bytesIn']  = $observer->compressedTotal;
					$retArray['bytesOut'] = $observer->uncompressedTotal;
					$retArray['status']   = true;
					$retArray['done']     = false;
					$retArray['factory']  = AKFactory::serialize();
				}
				break;

case 'finalizeRestore':
				$root = AKFactory::get('kickstart.setup.destdir');
				// Remove the installation directory
				recursive_remove_directory($root . '/installation');

$postproc = AKFactory::getPostProc();

/**
				 * Should I rename the htaccess.bak and web.config.bak files back to their live filenames...?
				 */
				$renameFiles = AKFactory::get('kickstart.setup.postrenamefiles', true);

if ($renameFiles)
				{
					// Rename htaccess.bak to .htaccess
					if (file_exists($root . '/htaccess.bak'))
					{
						if (file_exists($root . '/.htaccess'))
						{
							$postproc->unlink($root . '/.htaccess');
						}
						$postproc->rename($root . '/htaccess.bak', $root . '/.htaccess');
					}

// Rename htaccess.bak to .htaccess
					if (file_exists($root . '/web.config.bak'))
					{
						if (file_exists($root . '/web.config'))
						{
							$postproc->unlink($root . '/web.config');
						}
						$postproc->rename($root . '/web.config.bak', $root . '/web.config');
					}
				}

// Remove restoration.php
				$basepath = KSROOTDIR;
				$basepath = rtrim(str_replace('\\', '/', $basepath), '/');
				if (!empty($basepath))
				{
					$basepath .= '/';
				}
				$postproc->unlink($basepath . 'restoration.php');

// Import a custom finalisation file
				$filename = dirname(__FILE__) . '/restore_finalisation.php';
				if (file_exists($filename))
				{
					// We cannot use the Filesystem API here.
					if (ini_get('opcache.enable')
						&& function_exists('opcache_invalidate')
						&& (!ini_get('opcache.restrict_api') || stripos(realpath($_SERVER['SCRIPT_FILENAME']), ini_get('opcache.restrict_api')) === 0)
					)
					{
						\opcache_invalidate($filename, true);
					}
					if (function_exists('apc_compile_file'))
					{
						\apc_compile_file($filename);
					}
					if (function_exists('wincache_refresh_if_changed'))
					{
						\wincache_refresh_if_changed(array($filename));
					}
					if (function_exists('xcache_asm'))
					{
						xcache_asm($filename);
					}
					include_once $filename;
				}

// Run a custom finalisation script
				if (function_exists('finalizeRestore'))
				{
					finalizeRestore($root, $basepath);
				}
				break;

default:
				// Invalid task!
				$enabled = false;
				break;
		}
	}

// Maybe we weren't authorized or the task was invalid?
	if (!$enabled)
	{
		// Maybe the user failed to enter any information
		$retArray['status']  = false;
		$retArray['message'] = AKText::_('ERR_INVALID_LOGIN');
	}

// JSON encode the message
	$json = json_encode($retArray);
	// Do I have to encrypt?
	$password = AKFactory::get('kickstart.security.password', null);
	if (!empty($password))
	{
		$json = AKEncryptionAES::AESEncryptCtr($json, $password, 128);
	}

// Return the message
	echo "###$json###";

}

// ------------ lixlpixel recursive PHP functions -------------
// recursive_remove_directory( directory to delete, empty )
// expects path to directory and optional TRUE / FALSE to empty
// of course PHP has to have the rights to delete the directory
// you specify and all files and folders inside the directory
// ------------------------------------------------------------
function recursive_remove_directory($directory)
{
	// if the path has a slash at the end we remove it here
	if (substr($directory, -1) == '/')
	{
		$directory = substr($directory, 0, -1);
	}
	// if the path is not valid or is not a directory ...
	if (!file_exists($directory) || !is_dir($directory))
	{
		// ... we return false and exit the function
		return false;
		// ... if the path is not readable
	}
	elseif (!is_readable($directory))
	{
		// ... we return false and exit the function
		return false;
		// ... else if the path is readable
	}
	else
	{
		// we open the directory
		$handle   = opendir($directory);
		$postproc = AKFactory::getPostProc();
		// and scan through the items inside
		while (false !== ($item = readdir($handle)))
		{
			// if the filepointer is not the current directory
			// or the parent directory
			if ($item != '.' && $item != '..')
			{
				// we build the new path to delete
				$path = $directory . '/' . $item;
				// if the new path is a directory
				if (is_dir($path))
				{
					// we call this function with the new path
					recursive_remove_directory($path);
					// if the new path is a file
				}
				else
				{
					// we remove the file
					$postproc->unlink($path);
				}
			}
		}
		// close the directory
		closedir($handle);
		// try to delete the now empty directory
		if (!$postproc->rmdir($directory))
		{
			// return false if not possible
			return false;
		}

// return success
		return true;
	}
}